Yamaha CP1, Data List

Page: 13 / 20

CP1 Data List
13
Bank Select Bulk Dump Block
MIDI Data Table
Available Bank Select/Program Change
Parameter Base Address
“Top Address” indicates the top address of each block designated by bulk dump operation.
“Byte Count” indicates the data size contained in each block designated by bulk dump
operation.
The Block from the Bulk Header to the Bulk Footer of the Performance can be received
regardless their order. They can be received even if all of them are not transmitted. They
cannot be received if the irrelevant Block is included.
To execute 1 Performance bulk dump request, designate its corresponding Bulk Header
address.
When the Multiple Bulk Control Footer is received, Performances will be saved to the Flash
ROM.
For the information about “mm” and “nn” shown in the following list, refer to MIDI
PARAMETER CHANGE TABLE (BULK CONTROL) below.
MSB (HEX)
LSB
(HEX)
Program
No.
Type Memory Description
63 3F 61 3D 0 – 15 Performance PRE A When Keyboard Mode
(KbdMode) is set to
“layer” or “split”, this MIDI
data is received via the
Basic Receive Channel
(RecvCh). When
Keyboard Mode
(KbdMode) is set to
“zone”, this MIDI data is
received via Channel 1 or
2.
62 3E 0 – 15 PRE B
63 3F 0 – 15 PRE C
64 40 0 – 15 USR A
65 41 0 – 15 USR B
66 42 0 – 15 USR C
68 44 0 – 15 EXT A
69 45 0 – 15 EXT B
70 46 0 – 15 EXT C
Parameter Block Description Top Address
H M L
SYSTEM 00 00 00 System
00 20 00 Master EQ
BULK CONTROL 0E 00 00 Header
0F 00 00 Footer
MULTIPLE BULK CONTROL 10 00 00 Header
11 00 00 Footer
PERFORMANCE COMMON 30 00 00 Performance Common
PERFORMANCE PART 31 00 00 Part 1
31 01 00 Part 2
31 10 00 Pre-Amp Part 1
31 11 00 Pre-Amp Part 2
31 20 00 Modulation Part 1
31 21 00 Modulation Part 2
31 30 00 Power-Amp Part 1
31 31 00 Power-Amp Part 2
PERFORMANCE ZONE 32 00 00 Zone 1
:
32 03 00 Zone 4
Parameter Block Description
Byte Count Top Address
Dec Hex H M L
SYSTEM System 60 3C 00 00 00
Master EQ (for Voice Mode) 22 16 00 20 00
PERFORMANCE Bulk Header 0 00 0E mm nn
COMMON Common 68 44 30 00 00
Reverb 38 26 30 01 00
Controller (PB, FC1, FC2, FS) 30 1E 30 05 00
Assignable Knob 30 1E 30 06 00
PART Part 1 48 30 31 00 00
Part 2 48 30 31 01 00
Pre-Amp Part 1 38 26 31 10 00
Pre-Amp Part 2 38 26 31 11 00
Modulation Part 1 38 26 31 20 00
Modulation Part 2 38 26 31 21 00
Power-Amp Part 1 38 26 31 30 00
Power-Amp Part 2 38 26 31 31 00
MASTER KEYBOARD
ZONE Zone 1 16 10 32 00 00
: 4 Blocks
Zone 4 16 10 32 03 00
Bulk Footer 0 00 0F mm nn