120
Disk
When using the disk-related function, make sure to first set the
[FUNCTION] button to on and call up the appropriate page before
inserting the floppy disk. Disk functions cannot be used — even
when pressing the [FUNCTION] button — if a floppy disk has been
inserted and the [SONG] button is set to on. In this case, press the
[SONG] button again so that the lamp goes out, then use the Disk
functions.
Format (FORMAT) Display —
PAGE
4
Format the floppy disk for the use with the CVP-94/92. Refer to page
94 for information on formatting a new, blank disk or disks of different
formats.
The operation explained here is for re-formatting a disk that has al-
ready been used with the CVP-94/92 and deleting all data on the disk.
• Formatting a disk erases all the data
on the disk.
Types of Format
• 2DD disks are formatted into 720 KB,
while 2HD disks are formatted into
1.44 MB.
X
Execute the format operation.
............................................................
Press the
START
button.
➔
An “Are you sure” confirmation prompt will appear. Press
YES
to
execute the format or
NO
to cancel.
A bar graph appears in the LCD display during format to indiate the
process of format. Once a disk has been formatted, song data and other
data can be recorded, saved, or copied or other data to it.
Z
Insert the disk to be formatted.
.........................................................
Make sure that the disk’s write protect tab is set to the “write” posi-
tion, and insert the disk into the disk drive face up with the shutter for-
ward until it clicks into place.
○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○
Write protect tab closed
(unlocked — write enabled)
DISK IN USE
Shutter
Label
