Yamaha Clavinova CVP-403 Owner'S Manual Download Page 71 | Manualshive

Page: 71 / 226

background image

Basic Oper

ation

Basic Displays (Main Display and File Selection Display)

CVP-405/403/401 Owner’s Manual

71

Copying Files/Folders (Copy & Paste)

This operation lets you copy a file/folder and paste it to another location (folder).

1

Call up the display containing the file/folder you want to copy.

2

Press the [3

†

†

†

†

] (COPY) button to copy the file/folder.

The pop-up window for the Copy operation appears at the bottom of the dis-
play.

3

Press one of the [A]–[J] buttons corresponding to the desired file/
folder.

To cancel the selection, press the same [A]–[J] button again.

■

Selecting all files/folders

Press the [6

†

] (ALL) button to select all files/folders indicated on the cur-

rent display including the other pages.
To cancel the selection, press the [6

†

] (ALL OFF) button again.

4

Press the [7

†

] (OK) button to confirm the file/folder selection.

To cancel the Copy operation, press the [8

†

] (CANCEL) button.

5

Select the destination tab (USER/USB) to paste the file/folder, by
using the TAB [

√

][

®

] buttons.

6

Press the [4

†

†

†

†

] (PASTE) button to paste the file/folder.

The folder/file copied and pasted appears on the display at the appropriate
position among the files in alphabetical order.

Restrictions for protected Songs

Commercially available song data may be copy protected to prevent illegal
copying or accidental erasure. They are marked by the indications at the
upper left side of the file names. The indications and relevant restrictions
are detailed below.

Note for “Prot. 2 Orig” and “Prot. 2 Edit” Song file operation

Make sure to save the “Prot. 2 Edit” Song to the same folder containing its
original “Prot. 2 Orig” Song. Otherwise the “Prot. 2 Edit” Song cannot be
played back. Also, if you move a “Prot. 2 Edit” Song, be sure to move its
original “Prot. 2 Orig” Song to the same location (folder) at the same time.

Prot. 1

Indicates Preset Songs saved to the User tab display, Disk Orchestra
Collection (DOC) Songs, and Disklavier Piano Soft Songs. These
cannot be copied/moved/saved to USB storage device.

Prot. 2 Orig

Indicates Yamaha-protection-formatted Songs. These cannot be
copied. These can be moved/saved only to the USER tab display
and USB storage device.

Prot. 2 Edit

Indicates edited “Prot. 2 Orig” Songs. Make sure to save these to
the same folder containing the corresponding “Prot. 2 Orig” Song.
These cannot be copied. These can be moved/saved only to the
USER tab display and USB storage device.

«
...
69
70
71
72
73
...
»

Summary of Contents for Clavinova CVP-403



































































































































































































































Reviews:

No comments

Related manuals for Clavinova CVP-403

Brand: Garmin Pages: 2

PREDATOR AETHON 500

Brand: Acer Pages: 7

Brand: Volvo Pages: 19

Brand: Man & Machine Pages: 6

Brand: Tysso Pages: 14

Brand: Macally Pages: 19

Brand: Macally Pages: 8

Brand: COP-USA Pages: 15

Brand: Igo Pages: 2

Brand: Keydous Pages: 3

Brand: KEY POWER Pages: 24

Kurzweil KP300X

Brand: HDC Pages: 56

Brand: Behavior Tech Computer Pages: 28

Brand: Trevi Pages: 32

BOOKMAN MWS-2018

Brand: Franklin Pages: 19

Universal Keyboard Wedge

Brand: Datalogic Pages: 11

Language Master LM-6000B

Brand: Franklin Pages: 28

Brand: Franklin Pages: 28

Brands by name

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Popular brands

Load more brands