Yamaha Clavinova CVP-403 Owner'S Manual Download Page 140

Page: 140 / 226

Using, Creating and Editing Songs

Recording Your Performance

CVP-405/403/401 Owner’s Manual

140

Quick Recording

This lets you conveniently and quickly record your performance.

Press the SONG [REC] and SONG [STOP] buttons simultaneously.

A blank Song (“New Song”) is called up for recording.

Make the desired panel settings for your keyboard performance.

Below are some example settings you may want to try.

• Recording the RIGHT 1 part

Select the voice for the RIGHT 1 part by calling up the Voice selection dis-
play (page 32).

• Recording the Dual voice (RIGHT 1 and 2 parts)

Turn on the PART ON/OFF [DUAL (RIGHT2)] button (page 81). Select the
voice for each keyboard part (RIGHT 1, 2) by calling up the Voice selec-
tion display (page 32).

• Recording the LEFT part

Turn on the PART ON/OFF [SPLIT (LEFT)] button (page 82). Select the
voice for the LEFT part by calling up the Voice selection display (page 32).

• Recording Styles

Select a Style (page 45).

Set the tempo for recording by pressing the TEMPO [–] [+] buttons, as
necessary.

• Using Registration Memory panel setups

Press one of the REGISTRATION MEMORY [1–8] buttons.

While holding the SONG [REC] button, press the SONG TRACK but-
tons to be recorded.

• Recording your performance

Press the SONG [TRACK 1 (R)] button for the right-hand part recording,
and/or the SONG [TRACK 2 (L)] button for the left-hand part recording.

• Recording Styles

Press the SONG [EXTRA TRACKS (STYLE)] button.

• Recording your performance and the Style playback simultaneously

Press the SONG [TRACK 1 (R)]/[TRACK 2 (L)] buttons and the
SONG[EXTRA TRACKS (STYLE)] button.

The RIGHT and/or LEFT parts are
recorded onto separate tracks.

With Multi Track Recording, you
can record RIGHT 2 part individ-
ually.

Summary of Contents for Clavinova CVP-403



































































































































































































































Search results

Summary of Contents for Clavinova CVP-403

Reviews:

Related manuals for Clavinova CVP-403

Brands by name

Popular brands

Yamaha Clavinova CVP-403, Owner'S Manual

Search results

Summary of Contents for Clavinova CVP-403

Reviews:

Related manuals for Clavinova CVP-403

Brands by name

Popular brands