TEST PROGRAM
CVP-205/CVP-205M
50
1. Preparation
1) The volume is usually moved to the use position when no volume change is required.
2) Measuring instruments: frequency counter, level meter (with JIS-C filter)
Note: Connect a stereo plug to the [PHONES] jack at 33 ohms.
3) Jigs: foot volume (FC-7), MIDI cable, floppy disk (2HD & 2DD), microphone
2. How to enter the Test Program
While pressing the [C#2], [F2] and [G#2] keys, turn the [POWER ON/OFF] switch on.
3. Proceeding through the Teat Program
When the test program is activated, the sign “TEST” is indicated on the LCD display.
Select the test program item to be executed by pressing the [TEMPO-] or [TEMPO+] button.
Press the [START/STOP] button to execute testing. When the test result is OK, press the [START/STOP] button to return to the test
item name on display. Proceed to the next test by pressing the [TEMPO-] or [TEMPO+] button. When the test result is OK, an asterisk
(*) is added in front of its item name on display.
When the test result is NG, press the [DEMO] button or the lowest (leftmost) white key on the keyboard to return to the test item name
on display and then turn off the [POWER ON/OFF] switch to end the test program.
4. Test program list
No.
LCD (initial)
Test Function and Judgment criteria
1
2
3
4
5
6
7
8
10
12
13
001: Version
002: ROM Check1
003: RAM Check1
004:Flash Check1
005: Wave ROM Check1
006: Wave RAM Check1
007: FDD Check
008: Effect1 RAM Check
010: Effect3 RAM Check
012: TG 1 Check
013: TG 2 Check
Displays each ROM version.
ROM versions are displayed alternately on the LCD.
Checks the ROMs that are connected to the CPU bus.
The test results appear on the LCD. Check the LCD “ROM Check1 OK”
Checks the RAMs that are connected to the CPU bus.
The test results appear on the LCD. Check the LCD “RAM Check1 OK”
Checks the Flash Memories that are connected to the CPU bus.
The test results appear on the LCD. Check the LCD “Flash Check1 OK”
Checks the Wave ROMs.
The test results appear on the LCD. Check the LCD “XG Wave ROM Check OK”
“Natural Wave ROM1 Check OK”
Checks the Wave RAMs.
The test results appear on the LCD. Check the LCD “XG Wave RAM Check OK”
“Natural Wave RAM1 Check OK”
Checks the floppy disk drive unit.
Insert the floppy disks one bye one (2HD or 2DD).
The test will be executed immediately if an FD is inserted in the drive. After completing the test for one FD,
replace it with another to continue the test.
Displays “FDD Check OK” if the test result is OK.
Displays “NO FD” and stands by for FD insertion if an FD is drawn out before completion of the test.
Displays “PROTECT FD” if the write-protect switch of FD is on.
Displays “UNFORMAT FD” if non-formatted FD is inserted.
Checks the Reverb (Natural voice) RAM.
Outputs the sine wave (C3) MAX at the send level and MIN at the drive level.
Check the sound by hearing that there is not noise or abnormal sound.
Checks the XG1 RAM.
Outputs the sine wave (C3) MAX at the send level and MIN at the drive level.
Check the sound by hearing that there is not noise or abnormal sound.
Checks the Sound Source 1 (Autoscale) (XG)
Sequentially outputs the sine wave starting from the low keys (from C2 to G4) by switching the channel of the
sound source.
Check the sound by hearing that there is not noise or abnormal sound.
Checks the Sound Source 2 (Autoscale) (Natural Voice 1)
Sequentially outputs the sine wave starting from the low keys (from C2 to G4) by switching the channel of the
sound source.
Check the sound by hearing that there is not noise or abnormal sound.
Summary of Contents for Clavinova CVP-205
