91
CVP-202
➔
The number of the recalled registration appears next to the
bank name in the upper left corner of in the main display.
A pencil icon will appear to the right of the registration number
in the display as soon as any change is made to the panel buttons or
settings. The pencil icon is displayed to remind you that the current
panel settings are different from those stored by the Registration
function.
• Registered panel settings are not recalled
when a bank is selected. The settings are
recalled only when one of the numbered
buttons ([1] through [4]) is pressed.
• When the LEFT PEDAL function is set to
REGISTRATION (see page 138), the left
pedal can be used to select the registration
memories in sequential order (A1 through
E4), letting you recall a different registration
each time the pedal is pressed. However,
other left pedal settings saved by the Regis-
tration function cannot be recalled in this
case.
You can use the Registration Freeze function to prevent certain panel
settings from being changed when a Registration is recalled. This allows
you to recall various registrations while using the Auto Accompaniment
without suddenly changing the style or volume settings.
Z
Open the REGISTRATION [FREEZE] display.
.....................
Protecting Panel Settings
For a list of the settings in each freeze
category, see page 11 in the Data List.
Press
[DIRECT ACCESS]
, then
[REGISTRATION]
.
➾
➔
The REGISTRATION [FREEZE] display appears.
Categories to be frozen are marked by an asterisk (
*
) in the menu
listing. Also, the
ON
setting (in the
ON
/
OFF
function over the middle
LCD button) is highlighted when a category to be frozen is selected.
Freeze categories
1
2
3
4
BANK
BANK
REGISTRATION/ ONE TOUCH SETTING
ONE TOUCH
SETTING
REGIST-
RATION
3
4
BANK
BANK
REGISTRATION/ ONE TOUCH SETTING
ONE TOUCH
SETTING
REGIST-
RATION
DIRECT ACCESS
Edit symbol
89
○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○
Using Registrations
The Clavinova’s pre-programmed factory
default panel settings can be stored in a regis-
tration memory to allow easy recall of the pre-
programmed panel settings. Using the REG-
ISTRATION function, register the factory
default settings (the preprogrammed settings
initially present when the Clavinova’s power is
first turned on) to [REGIST A-1] (see page
89). Now when you select [A-1] all panel
settings will be conveniently returned to their
factory default settings.
