90
CVP-202
C
Register the panel setup.
..........................................................................
Registration Memory
• Range: 1 — 4 (each bank)
• Basic setting: None
While holding down the
[REGISTRATION]
button, press one of the
buttons labeled
[1]
through
[4]
under REGISTRATION/ONE TOUCH
SETTING corresponding to the registration memory where you want to
save the setup.
➔
The number of the selected registration memory appears next to
the bank name in the upper left corner of the main display. The
panel settings that were previously stored in the selected registra-
tion are cleared and replaced by the new settings.
• Pre-programmed settings are initially
stored in all registration memories
when the Clavinova’s power is first
turned on.
• By default, the registration settings are
preserved even when the Clavinova’s
power is turned off (see page 152).
You can also save individual registra-
tions (or complete sets of 20 registra-
tions) to floppy disk for future recall
(see page 139).
Recalling the Registered Panel Settings
Z
Press the [REGISTRATION] button.
..............................................
➔
The [REGISTRATION] lamp lights.
X
Select a bank.
.......................................................................................................
Use the
[BANK +]
and
[BANK –]
buttons to select the bank that con-
tains the desired registration.
➔
The selected bank is displayed in the upper left corner of the main
display.
C
Select a registration.
Press one of the buttons labeled
[1]
through
[4]
under REGISTRA-
TION/ONE TOUCH SETTING corresponding to the registration
memory you want to recall.
Registration number
1
2
3
4
BANK
BANK
REGISTRATION/ ONE TOUCH SETTING
ONE TOUCH
SETTING
REGIST-
RATION
1
2
3
4
BANK
BANK
REGISTRATION/ ONE TOUCH SETTING
ONE TOUCH
SETTING
REGIST-
RATION
1
2
3
4
BANK
BANK
REGISTRATION/ ONE TOUCH SETTING
ONE TOUCH
SETTING
REGIST-
RATION
88
○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○
Using Registrations