Yamaha Clavinova CVP-105 Owner'S Manual Download Page 171

Page: 171 / 235

171

CVP-109/107/105/700

Select the track to be edited.

............................................................

Select the track whose parameters you wish to change by pressing

the

TRACK

button. If

TTL

(Total) is selected, any changes will

affect the entire song rather than an individual track.

Select the parameters to be changed.

....................................

Select the parameters to be changed by pressing the

SELECT

▼

▲

button.

Making Settings in the INITIAL EDIT Display

Change the settings.

..................................................................................

Use the data dial or [–] and [+] buttons to change the settings. You

can instantly check the effect of the changes, since the settings can be
changed during playback.

• If [TTL] is selected and the value of the

reverb depth is changed, the new setting
will also affect the keyboard sound.

• The voices of the tracks to which Auto

Accompaniment, rhythm and/or Harmony
data have been recorded, can also be
changed.

• The data may not be played back accu-

rately if you use the [REW] button while
editing the data.

Write the changes.

.......................................................................................

When all the Initial Data changes have been made as desired, press

the

WRITE

button. When the “

Are you sure?

” message is dis-

played, press the

YES

button to actually make the specified changes, or

to cancel.

When this is completed, the

WRITE

button will change to

UNDO

allowing you to undo the Write operation and restore the data of the
edited track to what it was before you made any edits.

• All edited data for any number of tracks

within a single song can be written in a
one-time Write operation, by pressing the
WRITE button.

• You can check whether the results of the

Initial Edit operation are what you ex-
pected by starting and stopping playback
with the [PLAY/STOP] button. (You
should try this before you do something
that would make it impossible to select
the UNDO function.)

• The Undo function cannot be used once

you’ve changed the setting, changed a
different setting, or exited from the Initial
Edit mode.

• The Undo feature cannot be used for

data recorded to internal memory (see
page 174).

169

○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○

Other Record Edit Functions

The current parameter value for the
selected track.

The parameter to
be changed.

The selected track
is highlighted.

CVP-109/107/700

Summary of Contents for Clavinova CVP-105












































































































































































































































Search results

Summary of Contents for Clavinova CVP-105

Reviews:

Brands by name

Popular brands

Yamaha Clavinova CVP-105, Owner'S Manual

Search results

Summary of Contents for Clavinova CVP-105

Reviews:

Brands by name

Popular brands