104
CLP-785, CLP-775, CLP-745, CLP-735, CLP-795GP, CLP-765GP Owner’s Manual
System Menu
This lets you set whether some settings of the Backup
Setting (below) are maintained or not when the power
is turned off. The Backup Setting consists of two
groups, “Voice” (including Voice related settings such
as Voice selection) and “Other” (including various
settings such as Song Repeat and Tuning), which can
be set individually.
*For information on whether Bluetooth functionality is
included with the instrument or not, refer to page 142.
1.
Press the [FUNCTION] button several times
to select the “System” menu (page 86).
2.
Use the [
u
]/[
d
] buttons to select “Backup,”
use the [>] button to call up the next display,
then use the [
u
]/[
d
] buttons to select
“Backup Setting.”
3.
Use the [>] then the [
u
]/[
d
] buttons to select
“Voice,” then use the [>] button to select “On”
or “Off.”
Each “Voice” contains the following settings:
• Voice selection for R1, R2 and L
• All the parameters other than Transpose in the
“Voice” menu
4.
Use the [
u
]/[
d
] buttons to select “Other,”
then use the [>] button to select “On” or
“Off.”
The “Other” contains the following settings:
• In the “Song” menu: Song Repeat, Volume (Song-
Keyboard), Audio Volume, Quick Play, Play Track
• In the “Metronome/Rhythm” menu: Volume, BPM,
Bell On/Off, Intro, Ending, Bass
• In the “System” menu: Tuning, Keyboard (except
“Duo” and “Duo Type”), Pedal, Sound, MIDI
5.
Press the [EXIT] button to exit from the
“System” menu display.
This lets you save data on internal memory to the
connected USB flash drive as a backup file (named
“clp-***.bup”). This backup file can be loaded to the
instrument via the Restore function (page 105) for
future.
NOTICE
• It may take 1 – 2 min
u
tes to complete this operation.
N
e
v
er t
u
rn
off the po
w
er d
u
ring this operation (
w
hile “Exec
u
ting” is sho
w
n).
Doing so co
u
ld res
u
lt in damage to the data.
• If the same
b
ack
u
p file (clp-***.
bu
p) is already sa
v
ed in the USB
flash dri
v
e, this operation
w
ill o
v
er
w
rite or replace this file
w
ith
ne
w
one.
1.
Connect the USB flash drive to the USB [TO
DEVICE] terminal.
2.
Press the [FUNCTION] button several times
to select the “System” menu (page 86).
3.
Use the [
u
]/[
d
] buttons to select “Backup,”
use the [>] button to call up the next display,
then use the [
u
]/[
d
] buttons to select
“Backup.”
4.
Use the [>] button to call up the next display,
then use the [
u
]/[
d
] buttons to select
“Execute.”
5.
Press the [>] button to execute the Backup
operation.
6.
Press the [EXIT] button to exit from the
“System” menu display.
NOTE
When you want to restore the settings in the backup file, execute
the Restore function.
Backup Setting
(Selecting parameters maintained even when the
power is turned off)
Data and settings maintained even when the
power is turned off
• User MIDI Song (saved in this instrument’s
“User” memory)
• System menu
Bluetooth* On/Off
Keyboard (Duo Type only)
Utility
• Backup Setting (explained here)
Backup
(Saving the Backup file for internal data)
