Yamaha Clavinova CLP-430, Owner'S Manual

Page: 69 / 96

69
Appendix
Assembling the Clavinova
Assembling the Clavinova
CAUTION
• Assemble the unit on a hard and flat floor with ample space.
• Be careful not to confuse parts, and be sure to install all parts in
the correct orientation. Please assemble the unit in accordance
with the sequence given below.
• Assembly should be carried out by at least two persons.
• Be sure to use only the included screws of the specified sizes. Do
not use any other screws. Use of incorrect screws can cause
damage or malfunction of the product.
• Be sure to tighten all screws upon completing assembly of the
unit.
• To disassemble the unit, reverse the assembly sequence given
below.
After completing the assembly, please
check the following.
• Are there any parts left over?
Review the assembly procedure and correct any
errors.
• Is the instrument clear of doors and other
movable fixtures?
Move the instrument to an appropriate location.
• Does the instrument make a rattling noise
when you shake it?
Tighten all screws.
• Does the pedal box rattle or give way when you
step on the pedals?
Turn the adjuster so that it is set firmly against the
floor.
• Are the pedal and power cords inserted securely
into the sockets?
Check the connection.
• If the unit creaks or is otherwise unsteady when
you play on the keyboard, refer to the assembly
diagrams and retighten all screws.
CAUTION
When moving the instrument
after assembly, always hold
the bottom of the main unit.
(On the CLP-470: Hold by the
bottom front of the main unit
and the handles on the rear
panel.) Do not hold the key
cover or top portion.
Improper handling can result
in damage to the instrument
or personal injury.
CAUTION
When moving the
instrument after assembly,
hold the instrument by the
bottom front of the main unit
and the handles on the rear
panel. Do not hold the key
cover or top portion.
Improper handling can
result in damage to the
instrument or personal
injury.
NOTICE
When transporting the instrument, cover the entire keyboard with the
protective sheet (pages 76, 80) before closing the key cover. The sheet
will protect the keyboard from being scratched.
When moving the instrument after assembly, always hold
the bottom of the main unit.
CAUTION
Do not hold the key
cover or top portion.
Improper handling can
result in damage to the
instrument or personal
injury
Assembly Precautions
Have a Philips-head (+) screwdriver of the
appropriate size ready.
470 440 430 S408 S406 465GP
470 440 430 S408 S406 465GP
470 440 430 S408 S406 465GP
Reference page
CLP-470 70
CLP-440/430 73
CLP-S408 76
CLP-S406 80
CLP-465GP 84
Hold here.
Do not hold here
Do not hold
here
Hold here
Do not hold
here
Hold here
Do not hold here