Yamaha Clavinova CLP-175, Owner'S Manual

Page: 50 / 124

Basic Operation
50
CLP-175
Saving Recorded Songs and Handling the Files...[FILE]
Saving recorded or other songs to Clavinova Storage
memory...[SaveToMemory]
If you record a song, then turn off the power to the Clavinova, the song will be erased. To save the recorded
song, you must save it into the Clavinova Storage memory or to a floppy disk. (To save a song to a floppy
disk, refer to the next section [SaveToDisk].) You can also save the preset songs, disk songs, and additional or
overwriting recordings (page 45) to Storage memory.
Procedure
See page 49 the basic operation information. The following is a detailed pro-
cedure of Step 4.
4-1
Name the song.
To move the cursor (a small underline), use the C [–]/[+] buttons.
To insert a space, press the C [–][+] buttons simultaneously.
To select a character on the cursor, use the D [–]/[+] buttons.
To delete a character, press the D [–][+] buttons simultaneously.
You can use up to 58 characters for a song name. If the name is longer
than the screen, use the C [–]/[+] buttons to move the cursor and
scroll the name.
“Execute?
→
”: Do you wish
to execute the operation?
“Sure?
→
”: Are you sure?
“Executing”: The Clavinova
is executing the operation.
“Completed”: The operation
is complete.
4-2
Execute the operation.
Press the B [+ (YES)] button located next to “Execute?
→
”.
“Sure?
→
” appears on the screen. Press the B [+ (YES)] button again
to confirm the operation. (To cancel the operation, press the B [–
(NO)] button.)
The Clavinova displays “Executing” on the screen during the opera-
tion. When the operation is complete, “Completed” appears.
The song is automatically numbered as “M—,” where “M” means
“Memory” and “—” is a number.
Do not turn off the power
while the screen displays
“Executing.” If Storage memory contains one or more songs, and you save a new song, the Clavi-
nova automatically sorts the songs alphabetically and renumbers them.
C
A
D
B
NO YES
TIP
• You can change the type
of characters on the
screen using the Char-
acterCode parameter.
• When you select a saved
song later, the name with
an extension “.MID” will
appear.
TERMINOLOGY
CAUTION
TIP