Yamaha Clavinova CLP-170, Owner'S Manual

Page: 90 / 124

90
CLP-170/150
MIDI [MIDI SETTING]
You can transmit the panel data, such as voice
selection, to a connected sequencer. Before you
record performance data to a connected MDF3 or
sequencer, it is useful if you first send and record
(at the beginning of the performance data) the
panel setup data for your performance during
playback.
See the procedure on page 71.
You can transmit the voice data specified in the
“Voice Setting” menu (page 77) as MIDI bulk data.
You can interrupt voice data bulk dump transmis-
sion by pressing the B [– (NO)] button.
See the procedure on page 71.
Transmitting the initial set-
tings on the panel [Ini-
tialSetup]
Executing voice data bulk
dump [VoiceBulkDump]
C
A
D
B
NO YES
C
A
D
B
NO YES