80
CLP-170/150
Detailed settings for the voices [VOICE SETTING]
You can set the [CHORUS] button on or off for
each voice. When you select a voice, the chorus on/
off setting for the voice automatically changes
according to this parameter.
Even if this parameter is turned on, the chorus effect is
disabled if the ChorusSend parameter is set to 0.
See the procedure on page 71.
Setting range:
On/Off
You can select other effects (than reverb and cho-
rus).
See the procedure on page 71.
Setting range:
DelayLCR
Delay applied at left, center, and
right positions.
DelayLR
Delay applied at left and right
positions.
Echo
Echo-like delay
CrossDelay
Left and right delays are crossed.
Symphonic
Adds a rich and deep acoustic
effect.
RotarySpeaker
Adds the vibrato effect of a rotary
speaker.
Tremolo
The volume level changes in
rapid cycles.
VibeRotor
The vibrato effect of a vibra-
phone.
AutoPan
The sound pans left to right and
back and forth.
Phaser
The phase changes periodically,
swelling the sound.
AutoWah
The center frequency of the wah
filter changes periodically.
SoundBoardRev Simulates the reverberation of a
piano soundboard.
Off
No effect.
Rotor= The rotating portion of an electrical device etc.
This will be displayed only if VibeRotor is selected
for the DSP Type parameter explained above.
This sets the speed of the vibrato effect that is
applied when you have selected Vibraphone and
are using the VibeRotor pedal.
See the procedure on page 71.
Setting range:
1–10
Setting the chorus on/off
[ChorusOnOff]
Selecting the DSP type*
[DSP Type (DSP)]
TIP
C
A
D
B
NO
YES
C
A
D
B
NO
YES
Setting the speed of the vibra-
phone vibrato effect* [VibeRo-
torSpeed]
TERMINOLOGY
Summary of Contents for Clavinova CLP-170
