CLP-110
Selecting & Playing Voices
ENGLISH
18
Adding Variations to the Sound – Reverb
This control enables you to select various digital reverb effects that add extra depth and expression
to the sound to create a realistic acoustic ambience.
When you select a reverb, the reverb is automatically turned on.
While holding down the
[VOICE]
button, press one of the C2–E2 keys to select a reverb
type.
Adjusting Reverb Depth
Adjust the reverb depth for the selected voice by pressing one of the C3–G
4 keys while
holding down the
[VOICE]
button. The depth range is from 0 through 20.
Procedure
Key
Reverb Type
Description
C2
Room
This setting adds a continuous reverb effect to the sound, similar to
the acoustic reverberation you would hear in a room.
C
2
Hall1
For a “bigger” reverb sound, use the HALL 1 setting. This effect sim-
ulates the natural reverberation of a small-size concert hall.
D2
Hall2
For a truly spacious reverb sound, use the HALL 2 setting. This effect
simulates the natural reverberation of a large concert hall.
D
2
Stage
Simulates the reverb of a stage environment.
E2
Off
No effect is applied.
C2 D2 E2
C 2
D 2
The lowest key
VOICE
TIP
The default reverb type (includ-
ing OFF) and depth settings are
different for each voice.
TIP
depth 0:
no effect
depth 20: maximum reverb
depth
C3: depth 0
G 4: depth 20
The lowest key
VOICE
The depth value increases as you press higher keys.
Summary of Contents for Clavinova CLP-110
Page 32: ...CLP 110 Index ENGLISH 32 MEMO ...
Page 40: ...CLP 110 Appendix 40 MEMO ...
Page 41: ...CLP 110 Appendix 41 MEMO CLP 110 ...
Page 42: ...CLP 110 Appendix 42 MEMO ...
