CL Editor Owner’s Manual
59
3
Module graphic
This area shows a graphic of the effect module or the GEQ module that is currently assigned to the rack, and the
parameters of that module. Double-click this to open the module editor for that rack unit. By holding down the
<Ctrl>(<
>) key of your computer keyboard and double-clicking this, you can open multiple rack module editors. For
these additional editors, the rack select buttons are not linked with the RACK popup window of the CL itself.
4
Input meter/Output meter
These indicate the level of the signals being input and output from the effect module or the GEQ module.
5
Output patch
Click the L CHANNEL or R CHANNEL area, and choose one of the following as the signal route that will be patched to
the L/R output channels of the internal effect.
(*) CL3: 1-64, CL1: 1-48
6
BYPASS
This switches the effect module or the GEQ module between active and bypassed states. An effect module is active
when the BYPASS button is dark.
NONE
No assignment
CH 1–72(*)
INPUT CH 1–72(*)
STIN1L–STIN8R
ST IN channel 1–8 (L/R)
INS CH 1–72(*)
INPUT CH 1–72(*) insert in
INS MIX 1–24
MIX channel 1–24 insert in
INS MTRX1–8
MATRIX channel 1–8 insert in
INS ST L, INS ST R, INS M(C)
Insert-in of STEREO channel L/R or the MONO channel