Yamaha CEmarking RCX221, User Manual

Page: 73 / 468

4-5
Chapter
4
OPERA
TION
3.4 Changing the RPB screen settings
The RPB screen contrast can be adjusted, and the key-press volume can be changed as
needed.
1
)
Turn on the power while holding down on the RPB.
The RPB setting screen ("ADJUST" mode) appears.
■
"ADJUST" mode for changing RPB screen settings
ＡＤＪＵＳＴ
［Ｆ１／Ｆ２］ｂｒｉｇｈｔｎｅｓｓ ６５
［Ｆ３／Ｆ４］ｖｏｌｕｍｅ ７０
［Ｆ５］ ｄｅｆａｕｌｔ
［ＥＳＣ］ ｒｅｂｏｏｔ
2
)
Use the following procedure to make adjustments.
• To adjust the screen contrast
[Setting range: 0% (bright) to 100% (dark)]
1. Press (brig 5%) or (brightness – 5%) to make adjustments.
2. Press to end the setting.
The screen returns to the normal menu screen.
• To change the key-press volume
[Setting range: 0% (off) to 100% (maximum)]
1. Press ( 5%) or (volume – 5%) to make adjustments.
2. Press to end the setting.
The screen returns to the normal menu screen.
• To initialize the settings
1. Press (default).
The screen contrast and key-press volume return to the default settings.
(contract: 65%, key volume: 70%)
3. RPB programming box