Yamaha CEmarking RCX221, User Manual

Page: 46 / 468

3-8
Chapter
3
INST
ALLA
TION
4. Connecting to the power
4.1.1 AC power connector wiring
●
Length of exposed wire lead
Strip the wire to expose 8 to 9 mm of bare lead.
8 to 9 mm
●
Wiring
Insert the wire lead into the opening in the power connector in either of the following
methods, and make sure the wire is securely attached.
■
When using the accessory lever
(1) Attach the lever to the
upper slot as shown and
press down on it with
your finger to depress
the internal spring.
(2) Insert the wire lead all the
way into the opening
(round hole) while still
holding the lever down.
(3) Release the lever to make
the wiring connection. Pull
gently on the wire to
make sure it is securely
attached. (Do not pull
strongly on the wire.)
Lever
■
When using a flat-blade screwdriver
(1) Insert the screwdriver
into the upper slot to
depress the internal
spring.
(2) Insert the wire with
properly exposed lead all
the way into the opening
(round hole).
(3) Release the screwdriver
to make the wiring
connection. Pull gently on
the wire to make sure it is
securely attached. (Do not
pull strongly on the wire.)
c
CAUTION
Basically only one wire can be inserted into one wire hole.