Yamaha CEmarking RCX221, User Manual

Page: 444 / 468

9-38
Chapter
9
TROUBLESHOOTING
[15] Memory card errors
15.1 : Invalid file attribute
Code : &H0F01
Meaning/Cause : a. Directory was accessed.
b. Read/write protected file was accessed.
Action : 1. Change to a file which can be accessed.
2. Change to a file allowing read/write.
15.2 : Read only file
Code : &H0F02
Meaning/Cause : Deletion of a read-only file on SD memory card was attempted.
Action : Read-only files cannot be deleted.
15.3 : Same file name already exists
Code : &H0F03
Meaning/Cause : The same file name already exists.
Action : File cannot be saved by overwriting the existing file with the
same name. Change the file name to save it or delete the same
name file on the SD memory card.
15.4 : File doesn't exist
Code : &H0F04
Meaning/Cause : Loading of file was attempted but file name does not exist.
Action : Change to a file name that currently exists.
15.5 : Illegal file type
Code : &H0F05
Meaning/Cause : Extension of the specified file is not supported.
Action : Specify the correct extension for file types that can be saved
and loaded.
15.6 : Illegal file name
Code : &H0F06
Meaning/Cause : Name or extension of the specified file is incorrect.
Action : Alphanumeric characters (uppercase) and "_" (underscore) can
only be used in file names and extensions.
15.7 : Directory level over
Code : &H0F07
Meaning/Cause : On the SD memory card, an attempt was made to move to a
subdirectory which exceeds 8 levels of hierarchy below the
root directory.
Action : This controller does not allow handling subdirectories if they
exceed 8 levels of hierarchy below the root directory.
[15] Memory card errors