Yamaha CEmarking RCX221, User Manual

Page: 133 / 468

4-65
Chapter
4
OPERA
TION
10. "PROGRAM" mode
10.3.1 Cursor movement
[Procedure]
To select the program, use the cursor (
↑
/
↓
) keys in "PROGRAM>DIR" mode.
The pointer cursor moves to the selected program number.
The program name is displayed at the right end on the system line (1st line).
10.3.2 Registering a new program name
When creating a new program, you must first register the program name.
[Procedure]
1) In "PROGRAM>DIR" mode, press (NEW) to enter "PROGRAM>DIR>NEW"
mode.
The message "Enter program name > " appears on the guideline.
2) Use to , to or to enter a program name.
A maximum of 8 characters can be used. (Press if you want to cancel the data
input.)
n
NOTE
Program names can be up to 8 characters consisting of a combination of
alphanumeric characters (0 to 9, A to Z) and underscores ( _ ).
■
Registering a new program
PROGRAM >DIR <TEST1 >
No. RW/RO
1 TEST1 55 952 RW
2 * TEST2 50 907 RW
3 PARTS100 38 843 RW
4 TEST100 100 1968 RW
Enter program name >ABC123_
Name Line Byte
3) Press to register the program name.
n
NOTE
The following program names have special meanings.
"FUNCTION"
"SEQUENCE"
"_SELECT"
"COMMON"
(Refer to "Programming Manual" for these programs.)