Yamaha CEmarking RCX221, User Manual

Page: 130 / 468

4-62
Chapter
4
OPERA
TION
10. "PROGRAM" mode
10.2.14 Searching a character string
[Procedure]
1) In "PROGRAM>EDIT" mode, press (FIND) to enter "PROGRAM>EDIT>FIND"
mode.
The message "Character string >" appears on the guideline.
2) Enter the character string you want to search for and press .
A maximum of 20 characters can be used.
■
Character string search
PROGRAM >EDIT
<TEST2 >
1 ’***** TEST2 PROGRAM *****
2 GOTO *_’
3 DO2(0)=0
4 WAIT DI3(4,3,2)=3
5 MOVE P,P0 ’ORIGIN
Character string >MOV_
———————————————————————————————————————————
1 2 3
Search starts from the cursor position towards the end of the program and stops at the
first matching character string.
■
Character string search
PROGRAM >EDIT <TEST2 >
18 MOVE P,P1
19 A=1
20 TOTO *A
21 *T2
22 WAIT A=1
SELECT COPY CUT PASTE BS
———————————————————————————————————————————
1 2 3
3) To continuously search for another character string, press (FIND+) or
(FIND-).
Pressing (FIND+) restarts the search from the current cursor position towards
the end of the program.
Pressing (FIND-) restarts the search from the current cursor position towards
the top of the program.
In either case, the search stops at the first matching character string.