Yamaha CEmarking RCX221, User Manual

Page: 104 / 468

4-36
Chapter
4
OPERA
TION
9. "AUTO" mode
9.5 Switching the program
If the program displayed on the screen is not the one you want to execute, it can be
switched to another program.
n
NOTE
The output is also reset when the program is reset. However, the output will
not be reset when a sequence program is being executed without selecting
"RST.DO" in the sequencer execution "ENABLE/DISABLE" fl ag setting.
[Procedure]
1) Press (DIR) in "AUTO" mode.
Program information appears. A pointer is displayed on the line number of the
program which is currently selected.
2) Use the cursor (
↑
/
↓
) keys to select the desired program and press .
The selected program will automatically be compiled and an object program file
made.
■
Switching programs
AUTO >DIR [T1] 100% <TEST2 >
No. NAME LINE BYTE RW/RO
1 TEST1 13 125 RW
2 TEST2 50 608 RW
3 PARTS100 38 411 RW
4 TEST3 7 78 RW