manualshive.com logo in svg

Yamaha BANSHEE YFZ350W, Owner'S Manual, Page: 139 / 140

Share
Download
Yamaha BANSHEE YFZ350W Owner'S Manual Download Page 139

 

M

 

Main switch .....................................................................4-1
Model label....................................................................11-2

 

O

 

Owner’s manual and tool kit............................................8-1

 

P

 

Parking............................................................................6-5
Parking brake..................................................................4-5
Parking brake free play, adjusting.................................8-35
Parking on a slope ..........................................................6-6
Part locations ..................................................................3-1
Periodic maintenance and lubrication chart ....................8-3
Pre-operation check list ..................................................5-1

 

R

 

Riding your ATV..............................................................7-1

 

S

 

Safety information ...........................................................1-1
Seat...............................................................................4-11
Shifting ............................................................................6-3
Shift pedal .......................................................................4-7
Shock absorber assemblies, adjusting the front ...........4-12
Shock absorber assembly, adjusting the rear...............4-13
Spark arrester, cleaning................................................8-19
Spark plugs, checking.....................................................8-7
Specifications................................................................10-1
Speed limiter ...................................................................4-3
Starter (choke) ..............................................................4-10
Storage ...........................................................................9-2
Suspension, lubricating the upper and lower arm 

pivots ..........................................................................8-43

Suspension relay arm and connecting arm pivoting 

points, lubricating the rear ......................................... 8-42

 

T

 

Tail/brake light bulb, replacing ..................................... 8-47
Throttle cable free play, adjusting ................................ 8-30
Throttle lever ...........................................................4-2

 

, 

 

5-5

Throttle OverRide System.............................................. 4-3
Tire pressure, measuring ............................................... 5-7
Tires ............................................................................... 5-6
Tire wear limit................................................................. 5-7
Transmission oil ......................................................5-4

 

, 

 

8-9

Troubleshooting ........................................................... 8-49
Troubleshooting charts ................................................ 8-51

 

V

 

Vehicle identification number ....................................... 11-1

 

W

 

Wheel bearings, checking............................................ 8-42
Wheel, installing........................................................... 8-49
Wheel, removing .......................................................... 8-48

Summary of Contents for BANSHEE YFZ350W













































































































































Reviews:

No comments