Yamaha AW 16G, Owner'S Manual

Page: 78 / 219

Using libraries and scene memories
78
Dynamics library
From this library you can recall dynamics settings to the
currently selected channel. Of library numbers 001–128,
numbers 001–040 are read-only, and 041–128 can be
written.
■
Recalling dynamics library data
1
Use the [INPUT SEL] keys, [TRACK SEL] keys,
[STEREO SEL] key, or pads 1–4 to select the
channel into which you want to recall the
dynamics settings.
2
Perform one of the following actions to
access the LIBRARY page of the DYN screen
• Press the [DYN] knob repeatedly
• Hold down the [DNY] knob and press the CUR-
SOR [ ]/[ ] keys
• Hold down the [DYN] knob and turn it to left or
right
You can also recall dynamics library data into an
input channel directly from the INPUT SETTING
popup window. To do so, move the cursor to the
DYN button in the window and press the [ENTER]
key.
Effect library
This library is used by internal effects 1/2. Of library
numbers 001–128, numbers 001–041 are read-only, and
042–128 can be written.
■
Recalling effect library data
1
Perform one of the following actions to
access the LIBRARY page of the EFFECT 1/2
screen
• Press the [EFFECT 1] or [EFFECT 2] knob repeat-
edly
• Hold down the [EFFECT 1] or [EFFECT 2] knob
and press the CURSOR [ ]/[ ] keys
• Hold down the [EFFECT 1] or [EFFECT 2] knob
and turn it to left or right
You can also recall library data for an effect that has
been inserted in the input channel directly from the
INPUT SETTING popup window. To do so, move
the cursor to the EFF1 or EFF2 button in the window
and press the [ENTER] key.
Note Note
• The [M] symbol indicates monaural input, and [S] indi-
cates that stereo input is supported. If an effect indi-
cated by [M] is inserted into paired channels (such as
the stereo output channel), the sense of stereo will be
lost.
• 019. HQ.Pitch cannot be recalled to effect 1.
Mastering library
This library contains settings used to apply EQ and
dynamics processing to the stereo output channel during
mixdown. It contains EQ and dynamics settings suitable
for processing the final mix. All library numbers 00–13
are read-only, and 00 is data for initializing the stereo
output channel.
■
Recalling mastering library data
1
Repeatedly press the [RECORD] key or hold
down the [RECORD] key and use the CUR-
SOR [
]/[ ] keys to access the MIXDOWN
page of the RECORD screen.
2
Move the cursor to the LIBRARY button in the
screen, and press the [ENTER] key.
The MASTERING LIBRARY popup window will
appear.
1 EXIT button
Closes the popup window and returns to the previ-
ous MIXDOWN page.
Sample library
This library contains sets of up to sixteen samples for use
with the Quick Loop Sampler. Sets of drum loop or
sound-effect samples are saved on the hard disk as sam-
ple libraries. When you recall one of these, those sam-
ples will be assigned to the pads and sample banks, so
you can immediately play them from the pads.
Note Note
Unlike the other libraries, the sample library data is
shared by all songs.
1