Yamaha AW 16G, Owner'S Manual

Page: 19 / 219

19
Introducing the
A
W16G
2
■
Mixer section
1 [TRACK SEL] keys 1–8
B [TRACK SEL] keys 9/10–15/16
C [STEREO SEL] key
Use these keys to select the mixer track channels or
recorder tracks that you want to control.
D Faders 1–8
E Faders 9/10–15/16
Normally, these faders adjust the playback level of
each recorder track. By changing the internal set-
tings, you can also use these faders to control the
input levels of input channels 1–8 and pads 1–4.
F
[STEREO] fader
This adjusts the output level of the stereo bus.
■
Selected Channel section
1
[EQ] knob
Turning this knob will adjust the EQ (equalizer) gain
for the currently selected channel. You can press
this knob to access the EQ screen, where you can
adjust all of the EQ settings.
B [DYN] knob
Turning this knob will adjust the dynamics depth for
the currently selected channel. You can press this
knob to access the DYN screen, where you can
adjust all of the dynamics settings.
C
[EFF 1] knob
D
[EFF 2] knob
Turning these knobs will adjust the amount of signal
that is sent from the currently selected channel to
the internal effects 1 and 2 (i.e., effect send levels 1
and 2). You can press these knobs to access the
EFF1 or EFF2 screens, where you can adjust the
parameters of the internal effects.
E [PAN/BAL] knob
Turning this knob will adjust the pan of the cur-
rently selected channel (or the balance of the stereo
output channel). You can press this knob to access
the PAN screen, where you can adjust pan for mul-
tiple channels.
F [HIGH] key
G [HI-MID] key
H [LO-MID] key
I [LOW] key
These keys select one of the four EQ bands (HIGH,
HI-MID, LO-MID, LOW) to be adjusted.
J
[VIEW] key
This key accesses the VIEW screen, where you can
check the level of each channel, or perform on-
screen adjustments to the faders and other mix
parameters of each channel.
6
1
4 5
2 3
6
7
8
9
J
1
2
3
4
5