Yamaha AVENTAGE RX-A880 Owner'S Manual Download

Page: 139 / 203

Setting the Zone2 initial volume for when the unit is

turned on

Sets the Zone2 initial volume for when the unit is turned on.

Setup menu

“Multi Zone” > “Zone2” > “Initial Volume”

Settings

Off

Sets the level at the volume level of the unit when it last
entered standby mode.

Mute

Sets the unit to mute the audio output.

-80.0 dB to +10.0 dB

(0.5 dB increments)
[0.5 to 90.5 (0.5
increments)]

Sets the level to the specified volume level.

NOTE

▪ This setting is not available when “Volume” is set to “Fixed”. For details, see the following:

– “Setting the use of volume adjustments for Zone2 output” (p.138)

▪ This setting works only when the volume level is set lower than “Max Volume” in “Zone2”. For details, see

the following:

– “Setting the Zone2 limit value of the volume” (p.138)

▪ For details on the scale of the volume display (dB unit or numeric value), see the following:

– “Setting the scale of the volume display” (p.147)

Adjusting the time deviation in relation to the main

zone

Adjusts the time deviation in relation to the main zone.

Setup menu

“Multi Zone” > “Zone2” > “Audio Delay”

Setting range

0 ms to 100 ms (1 ms increments)

Switching between stereo and monaural for Zone2

output

Switches between stereo and monaural for Zone2 output.

Setup menu

“Multi Zone” > “Zone2” > “Monaural”

Settings

Off

Produces stereo sounds in Zone2.

Produces monaural sounds in Zone2.

139

Summary of Contents for AVENTAGE RX-A880












































































































































































































Search results

Summary of Contents for AVENTAGE RX-A880

Reviews:

Related manuals for AVENTAGE RX-A880

Brands by name

Popular brands

Yamaha AVENTAGE RX-A880, Owner'S Manual

Search results

Summary of Contents for AVENTAGE RX-A880

Reviews:

Related manuals for AVENTAGE RX-A880

Brands by name

Popular brands