Yamaha AVENTAGE RX-A880 Owner'S Manual Download

Page: 115 / 203

Setting the equalizer

Selects the type of equalizer to be used and adjusts the tone.

Setup menu

“Speaker” > “Parametric EQ” > “Parametric EQ”

Settings

Manual

Select this option when you want to adjust the equalizer manually.

YPAO:Flat

Adjusts individual speakers to achieve the same characteristics.

YPAO:Front

Adjusts individual speakers to achieve the same characteristics as the

front speakers.

YPAO:Natural

Adjusts all speakers to achieve a natural sound.

Through

Does not use the equalizer.

NOTE

“YPAO:Flat”, “YPAO:Front”, and “YPAO:Natural” are available only when the YPAO measurement results

have already been saved. Press ENTER again to view the YPAO measurement results. For details on the
YPAO, see the following:

▪ “Optimizing the speaker settings automatically (YPAO)” (p.42)

When selecting “Manual”

Set “Parametric EQ” to “Manual” and press ENTER.

Press ENTER again to enter the edit screen.

Use the cursor keys to select a speaker and press ENTER.

NOTE

▪ To restore the default settings for all speakers, select “PEQ Data Clear” and then “OK”.
▪ To copy the parametric equalizer values acquired with the YPAO measurement results to the

“Manual” fields for fine adjustment, select “PEQ Data Copy” and then an equalizer type.

Use the cursor keys to select a center frequency from the 7 preset

bands (4 for subwoofer).

To fine-adjust the center frequency, Q factor (bandwidth) or gain,
use the cursor keys to select an item.

Freq.: Use the cursor keys to adjust the center frequency of the selected

band.

Q: Use the cursor keys to adjust the Q factor (bandwidth) of the selected

band.

Gain: Use the cursor keys to adjust the gain of the selected band.

Setting range

Center frequency: 15.6 Hz to 16.0 kHz (15.6 Hz to 250.0 Hz for

subwoofer)

Q factor: 0.500 to 10.080
Gain: -20.0 dB to +6.0 dB

Press SETUP.

This completes the settings.

115

Summary of Contents for AVENTAGE RX-A880












































































































































































































Search results

Summary of Contents for AVENTAGE RX-A880

Reviews:

Related manuals for AVENTAGE RX-A880

Brands by name

Popular brands

Yamaha AVENTAGE RX-A880, Owner'S Manual

Search results

Summary of Contents for AVENTAGE RX-A880

Reviews:

Related manuals for AVENTAGE RX-A880

Brands by name

Popular brands