Yamaha AVENTAGE RX-A880 Owner'S Manual Download

Page: 102 / 203

Clearing preset stations

Clear radio stations registered to the preset numbers.

Option menu

“Preset” > “Clear Preset”

Press TUNER to select “TUNER” as the input source.

“TUNER” is selected as the input source and the frequency currently

selected is displayed on the front display.

Press OPTION.

Use the cursor keys to select “Preset” and press ENTER.

ENHANCER

LINK

ECO

MASTER

OUT

-R

YPAO VOL. A - DRC

SLEEP

STEREO

PARTY

TUNED

ZONE

3 B

2 A

FPR

SBL

SBR

FPL

MUTE VIRTUAL

VOL.

Preset

Use the cursor keys to select “CLEAR”.

Use the cursor keys to select a preset station to be cleared and
press ENTER.

ENHANCER

LINK

ECO

MASTER

OUT

-R

YPAO VOL. A - DRC

SLEEP

PARTY

ZONE

3 B

2 A

MUTE VIRTUAL

FPR

SBL

SBR

FPL

VOL.

STEREO TUNED

01:FM 98.50MHz

Preset station to be cleared

If the preset station is cleared, “Cleared” appears and then the next in-use

preset number is displayed.

01:Cleared

Repeat step 5 until all desired preset stations are cleared.

Press OPTION.

This completes the clearing preset stations.

Clearing all preset stations

Clear all the radio stations registered to the preset numbers.

Option menu

“Preset” > “Clear All Preset”

Press TUNER to select “TUNER” as the input source.

“TUNER” is selected as the input source and the frequency currently

selected is displayed on the front display.

Press OPTION.

Use the cursor keys to select “Preset” and press ENTER.

Use the cursor keys to select “CLEAR ALL”.

Use the cursor keys to select “Execute” and press ENTER.

If all the preset stations are cleared, “CLEAR ALL” appears and the

“Option” menu closes automatically.

102

Summary of Contents for AVENTAGE RX-A880












































































































































































































Search results

Summary of Contents for AVENTAGE RX-A880

Reviews:

Related manuals for AVENTAGE RX-A880

Brands by name

Popular brands

Yamaha AVENTAGE RX-A880, Owner'S Manual

Search results

Summary of Contents for AVENTAGE RX-A880

Reviews:

Related manuals for AVENTAGE RX-A880

Brands by name

Popular brands