Yamaha AVENTAGE RX-A750 Owner'S Manual Download

Page: 39 / 149

To save the measurement results, use the cursor
keys (

) to select “SAVE” and press ENTER.

The adjusted speaker settings are applied.

• To finish the measurement without saving the result, select “CANCEL”.

Use the cursor keys (

) to select “YES” or “NO”

to enable/disable YPAO Volume and press ENTER.

• If YPAO Volume is enabled, the high- and low-frequency levels are

automatically adjusted according to the volume so that you can enjoy
natural sounds even at low volume.

• You can also enable/disable YPAO Volume in “YPAO Volume” (p.92) in the

“Option” menu.

Disconnect the YPAO microphone from the unit.

This completes optimization of the speaker settings.

Measuring at multiple listening positions
(multi measure) (RX-V779 only)

When “Multi Position” is set to “Yes”, follow the procedure below for
measurement. It takes about 10 minutes to measure 8 listening
positions.

• If any error message (such as E-1) or warning message (such as W-1) appears,

see “Error messages” (p.42) or “W arning messages” (p.43).

To start the measurement, use the cursor keys to
select “Measure” and press ENTER.

The measurement will start in 10 seconds. Press ENTER
again to start the measurement immediately.

• To cancel the measurement temporarily, press RETURN.

The following screen appears on the TV when the
measurement at the first position finishes.

Move the YPAO microphone to the next listening
position and press ENTER.

Repeat Step 2 until measurements at all listening positions
(up to 8) have been taken.

Caution

• The YPAO microphone is sensitive to heat, so should not be placed anywhere

where it could be exposed to direct sunlight or high temperatures (such as on
top of AV equipment).

1 2 3 4 5 6 7 8 9 10 11

ENT

MEMORY

MOVIE

ENHANCER

TUNING

PRESET

BAND

DISPLAY

RETURN

ENTER

SCREEN

OPTION

TOP MENU

MUTE

PROGRAM

VOLUME

POP-UP/MENU

PURE DIRECT

STRAIGHT

INFO

SLEEP

MUSIC

NET

PARTY

HDMI OUT

BLUETOOTH

MAIN

ZONE 2

USB

MODE

SCENE

DVD

NET

RADIO

HDMI

V-AUX

AUDIO

TUNER

SUR. DECODE

ENT

MEMORY

MOVIE

ENHANCER

TUNING

PRESET

BAND

DISPLAY

SCREEN

OPTION

TOP MENU

MUTE

PROGRAM

VOLUME

POP-UP/MENU

PURE DIRECT

STRAIGHT

INFO

SLEEP

MUSIC

NET

PARTY

HDMI OUT

BLUETOOTH

MAIN

ZONE 2

USB

MODE

SCENE

DVD

NET

RADIO

HDMI

V-AUX

AUDIO

TUNER

SUR. DECODE

ENTER

RETURN

Cursor keys

Summary of Contents for AVENTAGE RX-A750






















































































































































Search results

Summary of Contents for AVENTAGE RX-A750

Reviews:

Related manuals for AVENTAGE RX-A750

Brands by name

Popular brands

Yamaha AVENTAGE RX-A750, Owner'S Manual

Search results

Summary of Contents for AVENTAGE RX-A750

Reviews:

Related manuals for AVENTAGE RX-A750

Brands by name

Popular brands