En
119
■
Network
Displays the network information on the unit.
(When using wired or wireless [Wi-Fi] network connection)
(When using Wireless Direct)
■
System
Displays the system information on the unit.
• If the unit detects a newer firmware over the network, “!” (exclamation mark) appears at the upper right of
the “Information” and “System” icons, and the corresponding message will be displayed in this screen. You
can update the unit’s firmware by pressing ENTER in this screen and following the procedure in “Updating
the unit’s firmware via the network” (p.123).
■
Multi Zone
Displays information about Zone2.
IP Address
IP address
Subnet Mask
Subnet mask
Default Gateway
The IP address of the default gateway
DNS Server (P)
The IP address of the primary DNS server
DNS Server (S)
The IP address of the secondary DNS server
MAC Address (Ethernet)
MAC address
MAC Address (Wi-Fi)
vTuner ID
vTuner ID
Network Name
Network name (the unit’s name on the network)
Wired/Wireless
The status of the wired or wireless connection
SSID
(When using wireless [Wi-Fi] network connection)
The SSID of the wireless network
SSID
The SSID of the wireless network
Security
Security method
Security Key
Security key
IP Address
IP address
Subnet Mask
Subnet mask
MAC Address (Wi-Fi)
MAC address
Network Connection
“Wireless Direct” indication
Remote ID
The unit’s remote control ID setting (p.120)
TV Format
The unit’s video signal type (p.121)
Speaker Impedance
The speaker impedance setting of the unit (p.120)
Tuner Freq. Step
(Asia and General models only)
The FM/AM tuning frequency setting of the unit (p.121)
System ID
System ID number
Firmware Version
The version of firmware installed on the unit
Input
The input source selected for Zone2
Volume
The volume setting for Zone2
