Yamaha AVENTAGE RX-A6ABL User Manual Download Page 193

Page: 193 / 443

Adjusting the tone of the audio output

Adjusts the level of high-frequency range (Treble) and low-frequency range (Bass) individually.

Option menu

“Tone Control”

Setting range

-6.0 dB to +6.0 dB

NOTE

(

When both “Treble” and “Bass” are 0.0 dB, “Bypass” appears.

(

If you set an extreme value, sounds may not match those from other channels.

(

The audio output of the front speakers, center speaker and subwoofers can be adjusted.

Summary of Contents for AVENTAGE RX-A6ABL




























































































































































































































































































































































































































































Search results

Summary of Contents for AVENTAGE RX-A6ABL

Reviews:

Related manuals for AVENTAGE RX-A6ABL

Brands by name

Popular brands

Yamaha AVENTAGE RX-A6ABL, User Manual

Search results

Summary of Contents for AVENTAGE RX-A6ABL

Reviews:

Related manuals for AVENTAGE RX-A6ABL

Brands by name

Popular brands