manualshive.com logo in svg

Yamaha AVENTAGE RX-A6ABL, User Manual, Page: 124 / 443

Share
Download
Yamaha AVENTAGE RX-A6ABL User Manual Download Page 124

Configuring the speaker settings automatically based on the YPAO
measurement results with the angle/height measurement

Perform the following procedure to take a measurement when the “Angle/Height Measure” option is
selected.

NOTE

(

Do not use the microphone base until the corresponding message appear on the TV.

(

During the measuring process, test tones are output at high volume. You cannot adjust the volume.

(

During the measuring process, stay in a back corner of the room and note the following for accurate measurement.

(

Keep the room as quiet as possible.

(

Do not block sound between the speakers and the YPAO microphone.

(

Do not connect headphones.

(

YPAO multi measurement option cannot be enabled with wireless speakers.

1

Select the unit’s speaker impedance settings as necessary.

2

Configure the corresponding speaker settings.

3

Set the volume of the subwoofer to half. If the crossover frequency is adjustable,
set it to maximum.

VOLUME

HIGH CUT

CROSSOVER/

MIN

MAX

MIN

MAX

9

4

Place the YPAO microphone at your listening position (same height as your ears).

We recommend the use of a tripod as a microphone stand and adjust your listening position
(same height as your ears). You can use the tripod screws to stabilize the microphone.

124

PREPARATIONS > Configuring the speaker settings

Summary of Contents for AVENTAGE RX-A6ABL




























































































































































































































































































































































































































































Reviews:

No comments