Yamaha AVENTAGE RX-A680 Owner'S Manual Download

Page: 87 / 164

Use the cursor keys to select a preset station to be cleared and

press ENTER.

ENHANCER

LINK

ECO

MASTER

OUT

-R

YPAO VOL. A - DRC

SLEEP

PARTY

ZONE

3 B

2 A

MUTE VIRTUAL

FPR

SBL

SBR

FPL

VOL.

STEREO TUNED

01:FM 98.50MHz

Preset station to be cleared

If the preset station is cleared, “Cleared” appears and then the next in-use

preset number is displayed.

01:Cleared

Repeat step 5 until all desired preset stations are cleared.

Press OPTION.

This completes the clearing preset stations.

Configuring the shuffle setting

Configure the shuffle setting for playback.

Option menu

“Shuffle”

Settings

Off

Turns off the shuffle function.

Plays back songs in the current album (folder) in random order.

NOTE

This setting is available only when “USB” or “SERVER” is selected as the input source.

Configuring the repeat setting

Configure the repeat setting for playback.

Option menu

“Repeat”

Settings

Off

Turns off the repeat function.

One

Plays back the current song repeatedly.

All

Plays back all songs in the current album (folder) repeatedly.

NOTE

This setting is available only when “USB” or “SERVER” is selected as the input source.

Enabling volume control via AirPlay

Enables/disables volume control from iTunes/iPhone via AirPlay. When other than “Off”
is set, you can adjust the unit’s volume from the iTunes/iPhone during playback.

Option menu

“Volume Interlock”

Settings

Off

Disables volume control from iTunes/iPhone.

Limited

Enables volume control from iTunes/iPhone within the limited range
(-80 dB to -20 dB and mute).

Full

Enables volume control from iTunes/iPhone in the full range
(-80 dB to +16.5 dB and mute).

Summary of Contents for AVENTAGE RX-A680





































































































































































Search results

Summary of Contents for AVENTAGE RX-A680

Reviews:

Related manuals for AVENTAGE RX-A680

Brands by name

Popular brands

Yamaha AVENTAGE RX-A680, Owner'S Manual

Search results

Summary of Contents for AVENTAGE RX-A680

Reviews:

Related manuals for AVENTAGE RX-A680

Brands by name

Popular brands