n
AUDIO connection with an audio device such as a CD
player
Connect audio devices such as CD players and MD players to the unit. Depending on
the audio output jacks available on your audio device, choose one of the following
connections.
NOTE
To use a turntable, a commercially-available phono equalizer amplifier is required. Connect the output of the
phono equalizer amplifier to the unit.
Audio output jacks on audio device
Audio input jacks on the unit
Digital optical
AUDIO 1 (OPTICAL)
Digital coaxial
AUDIO 2 (COAXIAL)
AV 1 (COAXIAL)
Analog stereo
AUDIO 3 (AUDIO)
AV 2–3 (AUDIO)
Turntable (PHONO)
PHONO
OPTICAL
COAXIAL
COAXIAL
VIDEO
VIDEO
GND
AM
FM
75 Ω
ANTENNA
(RADIO)
MONITOR OUT
PRE OUT
SUBWOOFER
(BD/DVD)
2
3
1
4
ARC
NETWORK
(NET)
FRONT
CENTER
SURROUND
SINGLE
AV 3
AUDIO 1
AUDI0 2
AUDI0 3
AV 2
AV 1
PHONO
(TV)
1
2
HDMI
(HDCP2.2)
HDMI OUT
(HDCP2.2)
SPEAKERS
VIDEO
COAXIAL
AUDI0 2
OPTICAL
AUDIO 1
(TV)
R
L
COAXIAL
OPTICAL
R
L
PHONO
GND
GND
PHONO
C
C
L
R
L
R
O
O
R
L
L
R
The unit
(rear)
AV 1–3 jacks
AUDIO 1–3 jacks
Audio output
(either digital optical, digital coaxial,
or analog stereo)
Audio device
Turntable
PHONO jacks
Ground lead
Audio output (PHONO)
NOTE
▪ The PHONO jack of the unit is compatible with an MM cartridge. To connect a turntable with a low-output
MC cartridge, use a boosting transformer.
▪ Connecting the turntable to the GND terminal of the unit may reduce noise in the signal.
▪ “AUDIO1” is set as TV audio input at the factory. If you have connected any external device to the AUDIO
1 jacks, use “TV Audio Input” in the “Setup” menu to change the TV audio input assignment. To use the
SCENE function, you also need to change the input assignment for SCENE (TV). For details, see the
following:
– “Setting the audio jack used for TV audio input” (p.101)
– “Registering a scene” (p.75)
Connecting to the jack on the front panel
Use the AUX jack on the front panel to temporarily connect devices such as portable
audio players to the unit.
CAUTION
▪ Before making a connection, stop playback on the device and turn down the volume on the unit. The
volume may be unexpectedly loud, and this could result in damage to hearing.
NOTE
You need to prepare the audio cable that matches the output jacks on your device.
PROGRAM
TONE CONTROL
STRAIGHT
(CONNECT)
AUX
USB
AUDIO
5V
1A
PHONES
SILENT CINEMA
The unit (front)
Portable audio player
If you select “AUX” as the input source by pressing AUX, the audio played back on the
device will be output from the unit.
En
28
