Playing back more high-quality sounds with bi-amp connections
Using the four internal amplifiers for front speakers allows you to have more high-
quality sounds.
For example, you can use 2-way bi-amp speakers with a woofer and tweeter for front
speakers. It produces expansive sound in a bi-amp system featuring a woofer and
tweeter. By directly driving each speaker individually, it produces powerful sound
while maintaining the feeling of a high S/N ratio.
Note
When using the four internal amplifiers in bi-amp system, the unit supports only - to . -channel speaker
system.
Connecting front speakers that support bi-amp
connections
When using front speakers that support bi-amp connections, connect them to the
FRONT terminals and SURROUND BACK/PRESENCE/BI-AMP/ZONE B terminals.
To enable the bi-amp function, set “Power Amp Assign” (p.94) in the “Setup” menu
to “BI-AMP” after connecting the power cable to an AC wall outlet.
1
2
3
4
5
9
OPTICAL
COAXIAL
COAXIAL
VIDEO
VIDEO
VIDEO
AM
FM
75 Ω
ANTENNA
(RADIO)
MONITOR OUT
PRE OUT
SUBWOOFER
(BD/DVD)
2
3
1
4
ARC
NETWORK
(NET)
FRONT
CENTER
SPEAKERS
SURROUND
SINGLE
AV 3
AUDIO 1
AUDI0 2
AUDI0 3
AV 2
AV 1
(TV)
1
2
HDMI (HDCP2.2)
HDMI OUT
(HDCP2.2)
The unit (rear)
Note
▪ Surround back speakers, presence speakers, bi-amp speakers or Zone B speakers cannot be connected
simultaneously.
▪ The FRONT terminals and SURROUND BACK/PRESENCE/BI-AMP/ZONE B terminals output the same
signals.
Notice
▪ Before making bi-amp connections, remove any brackets or cables that connect a woofer with a
tweeter. Refer to the instruction manual of the speakers for details. If you are not making bi-amp
connections, make sure that the brackets or cables are connected before connecting the speaker
cables.
En
81
