Yamaha AVENTAGE RX-A3080 Owner'S Manual Download Page 183

Page: 183 / 189

183

Audio Return Channel (ARC)

ARC allows you to input TV audio to the unit with the HDMI cable which transmits video signal

to the TV.

Check the following after the HDMI Control settings.

Select a TV program with the TV remote control.

Check that the input source of the unit will be automatically switched to

“AUDIO 1” and the TV audio will be played back on the unit.

If you cannot hear the TV audio, check the following:

• “ARC” (p.145) in the “Setup” menu is set to “On”.

• The HDMI cable is connected to the ARC-compatible HDMI jack (HDMI jack marked

“ARC”) on the TV.

Some HDMI jack on the TV is not compatible with ARC. For details, refer to the instruction

manual for the TV.

• If the audio is interrupted while using ARC, set “ARC” (p.145) in the “Setup” menu to “Off” and use an

audio cable (digital optical or stereo pin cable) to input TV audio to the unit (p.44).

• When using ARC, connect a TV with an HDMI cable that supports ARC.

“AUDIO 1” is set as TV audio input at the factory. If you have connected any external device to the AUDIO

1 jacks, use “TV Audio Input” (p.145) in the “Setup” menu to change the TV audio input assignment. To use

the SCENE function (p.75), you also need to change the input assignment for SCENE 7. (The settings must

be changed only when SCENE 7 is used as the default (TV Viewing).)

HDMI signal compatibility

• When CPPM copy-protected DVD-Audio is played back, video/audio signals may not be

output, depending on the type of the DVD player.

• The unit is not compatible with HDCP-incompatible HDMI or DVI devices. For details, refer to

the instruction manual for each device.

• To decode audio bitstream signals on the unit, set the input source device appropriately so

that the device outputs the bitstream audio signals directly (does not decode the bitstream

signals on the playback device). For details, refer to the instruction manual for the playback

device.

Summary of Contents for AVENTAGE RX-A3080






























































































































































































Search results

Summary of Contents for AVENTAGE RX-A3080

Reviews:

Related manuals for AVENTAGE RX-A3080

Brands by name

Popular brands

Yamaha AVENTAGE RX-A3080, Owner'S Manual

Search results

Summary of Contents for AVENTAGE RX-A3080

Reviews:

Related manuals for AVENTAGE RX-A3080

Brands by name

Popular brands