PLAYBACK
➤
Configuring playback settings for different playback sources (Option menu)
En
108
■
Tone Control (Tone Control)
Adjusts the high-frequency range (Treble) and low-frequency range (Bass) of sounds.
Choices
Treble (Treble), Bass (Bass)
Setting range
-6.0 dB to Bypass (Bypass) to +6.0 dB, 0.5 dB increments
• If you set an extreme value, sounds may not match those from other channels.
• You can also adjust the “Tone Control” setting with the front panel controls by pressing TONE/BALANCE
repeatedly to select “Treble” or “Bass”, and PROGRAM to make an adjustment.
■
YPAO Volume (YPAO Volume)
Enables/disables YPAO Volume or Adaptive DRC.
Enables/disables YPAO Volume. When YPAO Volume is enabled, the high- and
low-frequency levels are automatically adjusted according to the volume so that
you can enjoy natural sounds even at low volume.
Settings
• YPAO Volume works effectively after the measurement results of “Auto Setup” have been already
saved (p.47).
• We recommend enabling both YPAO Volume and Adaptive DRC when you are listening at lower
volumes or at night.
Sets whether the dynamic range (from maximum to minimum) is automatically
adjusted when the volume level is adjusted. When it is set to “On”, it is useful for
listening to playback at a low volume at night.
Settings
If “On” is selected, the dynamic range becomes narrow at a low volume and wide
at a high volume.
Audio Mode
(Audio Mode)
(U.S.A. model only)
Switches between stereo and monaural for
FM/AM radio reception.
FM Mode
(FM Mode)
(Except for U.S.A. model)
Switches between stereo and monaural for FM
radio reception.
Traffic Program
(TrafficProgram)
(U.K. and Europe models only)
Automatically searches for a traffic information
station.
Shuffle
(Shuffle)
Configures the shuffle setting for the iPod
(p.85), USB storage device (p.88), or media
server (p.91).
—
Repeat
(Repeat)
Configures the repeat setting for the iPod
(p.85), USB storage device (p.88), or media
server (p.91).
—
Item
Function
Page
YPAO Volume (YPAO Vol.)
Off (Off)
Disables YPAO Volume.
On (On)
Enables YPAO Volume.
Adaptive DRC (A.DRC)
Off (Off)
The dynamic range is not automatically adjusted.
On (On)
Automatically adjusts the dynamic range when YPAO Volume is
enabled.
Volume: low
Volume: high
Input level
Input level
On
Off
On
Off
Out
put
level
Out
put
level
Summary of Contents for Aventage RX-A3040
Page 182: ...2014 Yamaha Corporation YG260B0 EN...