Yamaha Aventage RX-A2A User Manual Download

Page: 295 / 388

Backing up and restoring all the settings

Informs the unit's setting to a USB flash drive and restores it to the unit. Prepare a USB flash drive using
FAT16 or FAT32 format in advance.

Front Display menu

“Settings” > “Backup/Restore”

Choices

Backup

Backups all the settings for the USB flash drive.

Restore

Restores all the previous backuped settings.

In case of “Backup”

Connect the USB flash drive to the USB jack on the front panel.

Select “Backup”.

Select “Execute”.

In process, “Executing” is displayed on the front display. And “Backup Executing” is displayed on the TV.

When the process finishes, “Complete” is displayed (“Backup Complete” on the TV).

If “Error” appears on the front display (“Backup Failed” on the TV), check the following and start the process
again.

(

You cannot save by overwriting. If you save the settings repeatedly, please move the file in different folder.

(

The file is stored by the name of “MC_backup_(model name).dat” in the route of the USB flash drive.

NOTE

(

Do not turn off the unit during the backing up process. Otherwise, the settings may not be restored correctly.

(

The user information (such as account, password) is not saved.

(

You can also backup all the settings in “Backup/Restore” in the “Setup” menu.

Summary of Contents for Aventage RX-A2A





































































































































































































































































































































































































Search results

Summary of Contents for Aventage RX-A2A

Reviews:

Related manuals for Aventage RX-A2A

Brands by name

Popular brands

Yamaha Aventage RX-A2A, User Manual

Search results

Summary of Contents for Aventage RX-A2A

Reviews:

Related manuals for Aventage RX-A2A

Brands by name

Popular brands