Yamaha aventage RX-A2070 Owner'S Manual Download Page 125

Page: 125 / 232

125

■

Tone Control (Tone Control)

Adjusts the level of high-frequency range (Treble) and low-frequency range (Bass) individually.

Choices

Treble (Treble), Bass (Bass)

Setting range

-6.0 dB to 0.0 dB to +6.0 dB, 0.5 dB increments

• When both “Treble” and “Bass” are 0.0 dB, “Bypass” appears.

• If you set an extreme value, sounds may not match those from other channels.

You can also adjust the “Tone Control” setting with the front panel controls by pressing TONE CONTROL

repeatedly to select “Treble” or “Bass”, and PROGRAM to make an adjustment.

■

YPAO Volume (YPAO Volume)

Enables/disables YPAO Volume or Adaptive DRC.

YPAO Volume (YPAO Vol.)

Enables/disables YPAO Volume. When YPAO Volume is enabled, the high- and low-frequency

levels are automatically adjusted according to the volume so that you can enjoy natural

sounds even at low volume.

Settings

• YPAO Volume works effectively after the measurement results of “Auto Setup” have been already saved (p.54).

• We recommend enabling both YPAO Volume and Adaptive DRC when you are listening at lower volumes or at

night.

Adaptive DRC (A.DRC)

Sets whether the dynamic range (from maximum to minimum) is automatically adjusted when

the volume level is adjusted. When it is set to “On”, it is useful for listening to playback at a low

volume at night.

Settings

If “On” is selected, the dynamic range becomes narrow at a low volume and wide at a high

volume.

Input Settings
(Input Settings)

Input Trim
(In.Trim)

Corrects volume differences between input sources.

128

Audio Select
(A.Sel)

Selects the audio input jack to use when more than one
audio connection is made for one input source.

128

Video Out
(V.Out)

Selects a video to be output with the audio input source.

128

FM Mode
(FM Mode)

Switches between stereo and monaural for FM radio
reception.

128

Init Scan
(Init Scan)

(Australia, U.K., Europe and Russia models only)

Performs an initial scan for DAB radio reception.

Tune AID
(Tune AID)

(Australia, U.K., Europe and Russia models only)

Checks reception strength of each DAB channel label.

Shuffle
(Shuffle)

Configures the shuffle setting for the USB storage device
(p.102) or media server (p.106).

Repeat
(Repeat)

Configures the repeat setting for the USB storage device
(p.102) or media server (p.106).

Item

Function

Page

Off (Off)

Disables YPAO Volume.

On (On)

Enables YPAO Volume.

Off (Off)

The dynamic range is not automatically adjusted.

On (On)

Automatically adjusts the dynamic range when YPAO Volume is enabled.

Volume: low

Volume: high

Input level

Off

t l

vel

t le

vel

Summary of Contents for aventage RX-A2070









































































































































































































































Search results

Summary of Contents for aventage RX-A2070

Reviews:

Related manuals for aventage RX-A2070

Brands by name

Popular brands

Yamaha aventage RX-A2070, Owner'S Manual

Search results

Summary of Contents for aventage RX-A2070

Reviews:

Related manuals for aventage RX-A2070

Brands by name

Popular brands