Yamaha Aventage RX-A2040 Page 5 Owner'S Manual Download

Page: 5 / 182

Accessories

Accessories

Check that the following accessories are supplied with the product.



Remote control



Batteries (AAA, R03, UM-4) (x2)



AM antenna



FM antenna

*One of the above is supplied depending on the region of purchase.



YPAO microphone



Microphone base
Pole

(RX-A3040 only)

*Using for angle/height measurement during YPAO.



Wireless antenna



Power cable

*The supplied power cable varies

depending on the region of purchase.



CD-ROM (Owner’s Manual)



Easy Setup Guide



Safety Brochure

Insert the batteries the right
way round.

Operating range of the remote control

• Point the remote control at the remote control sensor on the unit and remain within the operating range

shown below.

• The illustrations of the main unit used in this manual are of the RX-A3040

(U.S.A. model), unless otherwise specified.

• Some features are not available in certain regions.

• Due to product improvements, specifications and appearance are subject to change without notice.

• This manual explains operations using the supplied remote control.

• This manual describes all the “iPod”, “iPhone” and “iPad” as the “iPod”. “iPod” refers to “iPod”, “iPhone”

and “iPad”, unless otherwise specified.

•

indicates precautions for use of the unit and its feature limitations.

•

indicates supplementary explanations for better use.

30°

Within
6 m (20 ft)

Summary of Contents for Aventage RX-A2040























































































































































































Search results

Summary of Contents for Aventage RX-A2040

Reviews:

Related manuals for Aventage RX-A2040

Brands by name

Popular brands

Yamaha Aventage RX-A2040, Owner'S Manual

Search results

Summary of Contents for Aventage RX-A2040

Reviews:

Related manuals for Aventage RX-A2040

Brands by name

Popular brands