Yamaha Aventage RX-A2040 Owner'S Manual Download

Page: 111 / 182

PLAYBACK

➤

Configuring playback settings for different playback sources (Option menu)

111

■

Audio Mode (Audio Mode)

(U.S.A. model only)

Switches between stereo and monaural for FM/AM radio reception.

• This setting is applied separately to each band (FM/AM).

Settings

• HD Radio programs are not available when the unit is in the monaural reception mode.

■

FM Mode (FM Mode)

(Except for U.S.A. model)

Switches between stereo and monaural for FM radio reception.

Settings

Auto (Auto)

Receives the selected band (FM or AM) in stereo sounds when the
signal reception is good and in monaural sounds when it is not good.

Mono (Mono)

Receives the selected band (FM or AM) in monaural sounds.

Stereo (Stereo)

Receives FM radio in stereo sounds.

Mono (Mono)

Receives FM radio in monaural sounds.

Summary of Contents for Aventage RX-A2040























































































































































































Search results

Summary of Contents for Aventage RX-A2040

Reviews:

Related manuals for Aventage RX-A2040

Brands by name

Popular brands

Yamaha Aventage RX-A2040, Owner'S Manual

Search results

Summary of Contents for Aventage RX-A2040

Reviews:

Related manuals for Aventage RX-A2040

Brands by name

Popular brands