PLAYBACK
➤
Playing back videos/audio in multiple rooms (multi-zone)
En
102
■
Other operations for Zone2, Zone3 or
Zone4
The following functions are also available when the zone you want
to operate is enabled.
Adjusting the volume (for Zone2 and Zone3 only)
Press VOLUME or MUTE.
Selecting the input source and settings at once (SCENE)
Press SCENE.
• To register the current settings (input source, volume and tone control) to a scene,
hold down the desired SCENE key until “SET Complete” appears on the front
display. (Only an input source can be registered for Zone4.)
Setting the sleep timer
Press SLEEP repeatedly to set the time (120 min, 90 min, 60 min, 30
min, off).
Adjusting the high-/low-frequency range of sounds
(for Zone2 and Zone3 only)
a
Press ZONE CONTROL on the front panel to select the zone to be
operated.
b
Press TONE/BALANCE repeatedly to select “Treble” or “Bass”.
c
Press PROGRAM to make an adjustment.
Setting range
-10.0 dB to +10.0 dB (2.0 dB increments)
Default
0.0 dB
Adjusting the front speaker balance (for Zone2 and Zone3 only)
a
Press ZONE CONTROL on the front panel to select the zone to be
operated.
b
Press TONE/BALANCE repeatedly to select “Balance”.
c
Press PROGRAM to make an adjustment.
■
Enjoying the same source in multiple
rooms (party mode)
The party mode allows you to play back in all zones the same
music that is being played back in the main zone. During the party
mode, stereo playback is automatically selected for all zones.
Utilize this function when you want to use main zone music as
background music for a house party.
1
Press PARTY.
Each time you press the key, the party mode is turned on or
off.
When the party mode is turned on, “PARTY” lights up in the
front display.
• You can select the zones to be included in the party mode in “Party Mode
Set” (p.138) in the “Setup” menu.
• Zone4 output is available only when an HDMI input is selected in the main
zone.
Caution
• To avoid unexpected noise, never play back DTS-CDs in Zone2, Zone3 or
Zone4.
S
LEEP
VOLUME
MUTE
S
CENE
PARTY
