Yamaha AVENTAGE RX-A1060 Owner'S Manual Download Page 19

Page: 19 / 190

Notes on installation of ceiling speakers

When installing presence speakers to a ceiling, install them just above the listening position,

or the ceiling between the extensions of the front speakers and listening position.

⬛

Setting the speaker impedance

Under its default settings, the unit is configured for 8-ohm speakers. When using a 6-ohm

speaker for any channel, set the speaker impedance to “6 Ω MIN”. In this case, you can also use

4-ohm speakers as the front speakers.

Before connecting speakers, connect the power cable to an AC wall outlet.

While holding down STRAIGHT on the front panel, press MAIN ZONE

Check that “SPEAKER IMP.” is displayed on the front display.

Press STRAIGHT to select “6 Ω MIN”.

Press MAIN ZONE

to set the unit to standby mode and remove the power

cable from the AC wall outlet.

You are now ready to connect the speakers.

Caution

Be sure to use speakers that are made for ceiling use and take anti-drop measures. Ask a qualified
contractor or dealer personnel for installation works.

SBR

SBL

FPR

FPL

MAIN ZONE

STRAIGHT

¡¡¡¡¡¡¡¡¡8¬MIN

SPEAKER¡IMP.

Summary of Contents for AVENTAGE RX-A1060































































































































































































Search results

Summary of Contents for AVENTAGE RX-A1060

Reviews:

Related manuals for AVENTAGE RX-A1060

Brands by name

Popular brands

Yamaha AVENTAGE RX-A1060, Owner'S Manual

Search results

Summary of Contents for AVENTAGE RX-A1060

Reviews:

Related manuals for AVENTAGE RX-A1060

Brands by name

Popular brands