Yamaha AVENTAGE RX-A1060, Owner'S Manual

Page: 152 / 190

En
152
Multi-zone output
Video/audio signals that can be output to Zone2 vary depending on how you connect the
device in Zone 2 to the unit's output jacks.
⬛
Audio output
m
: Available
*1 Available when “HDMI OUT2 Assign” (p.125) in the “Setup” menu is set to “Zone2” (Audio
Output: On)
*2 Available when 2-channel PCM signals are input (stereo output [down mixed to 2-channels]
when the input source selected in the main zone is selected)
Available when “HDMI OUT2 Assign” (p.125) in the “Setup” menu is set to “Zone2”
*3 Available when 2-channel PCM signals are input (stereo output [down mixed to 2-channels]
when the input source selected in the main zone is selected)
*4 Available when 2-channel PCM signals are input
*5 To play back DSD audio in Zone2, select “Main Zone Sync” as the Zone2 input with the web
control (p.91) or use the party mode (p.89).
⬛
Video output
m
: Available
*6 Available when “Monitor Out Assign” (p.125) in the “Setup” menu is set to “Zone2”
*7 Available when “HDMI OUT2 Assign” (p.125) in the “Setup” menu is set to “Zone2”
Using the unit’s
internal amplifier
(p.26)
Using an external amplifier (p.85)
In \ Zone2 Out EXTRA SP jacks ZONE OUT jacks
HDMI OUT 2
(ZONE OUT) jack (*1)
Digital audio (HDMI)
m
(*2)
m
(*2)
m
(*3)
Digital audio
(COAXIAL/OPTICAL)
m
(*4)
m
(*4)
Analog audio (AUDIO)
m m
USB (*5)
m m
Network sources (*5)
m m
TUNER
m m
In \ Zone2 Out
MONITOR OUT/ZONE OUT jacks (*6)
HDMI OUT 2 (ZONE OUT) jack
(*7)
COMPONENT VIDEO VIDEO
HDMI video
m
Component video
m
Composite video
m