Yamaha AVENTAGE RX-A1060 Owner'S Manual Download Page 150

Page: 150 / 190

150

Supported devices and file formats

This section explains the devices and file formats supported by the unit.

Supported devices

For information about specifications of each device, refer to the instruction manual of it.

⬛

Bluetooth device

• The unit supports Bluetooth devices that support A2DP or AVRCP.

• A Bluetooth device may not be detected by the unit or some feature may not be compatible,

depending on the model.

⬛

USB devices

• The unit supports USB mass storage class devices (e.g., flash memories or portable audio

players) using FAT16 or FAT32 format.

• Do not connect devices other than USB mass storage class devices (such as USB chargers or

USB hubs), PCs, card readers, an external HDD, etc.

• USB devices with encryption cannot be used.

• Some features may not be compatible, depending on the model or manufacturer of the USB

storage device.

⬛

AirPlay

AirPlay works with iPhone, iPad, and iPod touch with iOS 4.3.3 or later, Mac with OS X Mountain

Lion or later and Mac and PC with iTunes 10.2.2 or later.

(as of May 2016)

Made for.

iPhone 6 Plus, iPhone 6, iPhone 5s, iPhone 5c, iPhone 5, iPhone 4s

iPad Air 2, iPad mini 3, iPad Air, iPad mini 2, iPad mini, iPad (3rd and 4th generation), iPad 2

iPod touch (5th generation)

(as of May 2016)

File formats

For information about specifications of each file, refer to the instruction manual of your

recording device or consult file's help.

⬛

USB/PC (NAS)

* Linear PCM format only

• To play back FLAC files stored on a PC or NAS, you need to install server software that supports sharing of FLAC

files via DLNA on your PC or use a NAS that supports FLAC files.

• Digital Rights Management (DRM) contents cannot be played back.

File

Sampling frequency

(kHz)

Quantization

bitrate (bit)

Bitrate

The number

of channels

Gapless

playback

WAV *

32/44.1/48/88.2/96/1
76.4/192

16/24

⏤

✔

MP3

32/44.1/48

⏤

8 to 320

⏤

WMA

32/44.1/48

⏤

8 to 320

⏤

MPEG-4 AAC

32/44.1/48

⏤

8 to 320

⏤

FLAC

32/44.1/48/88.2/96/1
76.4/192

16/24

⏤

✔

ALAC

32/44.1/48/88.2/96

16/24

⏤

✔

AIFF

32/44.1/48/88.2/96/1
76.4/192

16/24

⏤

✔

DSD

2.8 MHz/5.6 MHz

⏤

Summary of Contents for AVENTAGE RX-A1060































































































































































































Search results

Summary of Contents for AVENTAGE RX-A1060

Reviews:

Related manuals for AVENTAGE RX-A1060

Brands by name

Popular brands

Yamaha AVENTAGE RX-A1060, Owner'S Manual

Search results

Summary of Contents for AVENTAGE RX-A1060

Reviews:

Related manuals for AVENTAGE RX-A1060

Brands by name

Popular brands