Yamaha AVENTAGE RX-A1060 Owner'S Manual Download Page 133

Page: 133 / 190

133

Removing the limitation on HDMI video output
(MONITOR CHECK)

The unit automatically detects resolutions supported by a TV connected to the HDMI OUT jack.

Disable the monitor check function if you want to specify a resolution in “Resolution” (p.118)

when the unit cannot detect the TV’s resolution or when you want to specify a different

resolution than the detected resolution.

Settings

Reset to “YES” if the unit becomes inoperable because video from the unit cannot be displayed on the TV after

“MONITOR CHECK” has been set to “SKIP”.

Selecting the HDMI 4K signal format (4K MODE)

Selects the format of signals input/output at the unit when HDMI 4K (60 Hz/50 Hz) compatible

TV and playback device are connected to the unit.

Settings

When “MODE 1” is selected, use a high-speed HDMI cable that supports 18 Gbps.

Backing up/recovering the settings (RECOV./BACKUP)

Creates backup of the settings of the unit, or recovers the settings from the backup.

⬛

Backup/recovery procedure

Press STRAIGHT repeatedly to select “BACKUP” or “RECOVERY” and press INFO to start the

process.

Choices

Restoring the default settings (INITIALIZE)

Restores the default settings for the unit.

Choices

YES

Enables the monitor check function. (Outputs video signals with a resolution
supported by the TV only.)

SKIP

Disables the monitor check function. (Outputs video signals with a specified
resolution regardless of compatibility with the TV.)

MODE 1

Inputs/outputs 4K (60 Hz/50 Hz) signals in 4:4:4, 4:2:2 or 4:2:0 format.

(4:2:0 format only for VIDEO AUX [HDMI IN] jack)

Depending on the connected device or HDMI cables, video may not be displayed
correctly. In this case, select “MODE 2”.

MODE 2

Inputs/outputs 4K (60 Hz/50 Hz) signals in 4:2:0 format.

YES

MONITOR CHECK

MODE 2

4K MODE

BACKUP

Creates backup of the settings of the unit in the internal memory.

RECOVERY

Recovers the settings of the unit from the backup (available only when
backup has been created).

Note

• Do not turn off the unit during the recovery process. Otherwise, the settings may not be restored

correctly.

• The backup does not contain user information (such as user accounts and passwords).

VIDEO

Restores the default settings for video configurations.

ALL

Restores the default settings for the unit.

CANCEL

Does not perform an initialization.

BACKUP

RECOV./BACKUP

CANCEL

INITIALIZE

Summary of Contents for AVENTAGE RX-A1060































































































































































































Search results

Summary of Contents for AVENTAGE RX-A1060

Reviews:

Related manuals for AVENTAGE RX-A1060

Brands by name

Popular brands

Yamaha AVENTAGE RX-A1060, Owner'S Manual

Search results

Summary of Contents for AVENTAGE RX-A1060

Reviews:

Related manuals for AVENTAGE RX-A1060

Brands by name

Popular brands