Yamaha AVENTAGE RX-A1060 Owner'S Manual Download Page 128

Page: 128 / 190

128

ECO

Configures the power supply settings.

⬛

Auto Power Standby

Sets the amount of time for the auto-standby function. If you do not operate the unit or if no

input signals are detected for the specified time, the unit will automatically go into standby

mode.

Settings

Default

U.K. and Europe models: 20 Minutes

Other models: Off

Just before the unit enters standby mode, “AutoPowerStdby” appears and then countdown starts in the front

display.

⬛

ECO Mode

Enables/disables the eco (power saving) mode.

You can reduce the unit’s power consumption by setting “ECO Mode” to “On”. After setting, be

sure to press ENTER to restart the unit.

Settings

• When “ECO Mode” is set to “On”, the front panel display may become dark.

• If you want to play audio at high volume, set “ECO Mode” to “Off”.

Language

Select an on-screen menu language.

Settings

English, Japanese, French, German, Spanish, Russian, Italian, Chinese

The information on the front display is provided in English only.

Off

Does not set the unit to standby mode automatically.

20 Minutes

Sets the unit to standby mode when you have not operated the unit and no input
signals are detected for 20 minutes.

2 Hours, 4 Hours,
8 Hours, 12 Hours

Sets the unit to standby mode when you have not operated the unit for the
specified time. For example, when “2 Hours” is selected, the unit will switch to
standby mode if you do not operate it for 2 hours.

Off

Disables the eco mode.

Enables the eco mode.

Summary of Contents for AVENTAGE RX-A1060































































































































































































Search results

Summary of Contents for AVENTAGE RX-A1060

Reviews:

Related manuals for AVENTAGE RX-A1060

Brands by name

Popular brands

Yamaha AVENTAGE RX-A1060, Owner'S Manual

Search results

Summary of Contents for AVENTAGE RX-A1060

Reviews:

Related manuals for AVENTAGE RX-A1060

Brands by name

Popular brands