Yamaha Aventage RX-A1050 Owner'S Manual Download

Page: 142 / 162

142

Bluetooth

Problem

Cause

Remedy

Bluetooth

connection cannot be established.

The

Bluetooth

function of the unit is disabled.

Enable the

Bluetooth

function (p.123).

Another

Bluetooth

device is already connected to the unit.

Terminate the current

Bluetooth

connection and then establish a new connection

(p.69).

The unit and the

Bluetooth

device are too far apart.

Move the

Bluetooth

device closer to the unit.

There is a device (such as microwave oven and wireless LAN) that
outputs signals in the 2.4 GHz frequency band nearby.

Move the unit away from those devices.

The

Bluetooth

device does not support A2DP.

Use a

Bluetooth

device that supports A2DP.

The connection information registered on the

Bluetooth

device is

not working for some reason.

Delete the connection information on the

Bluetooth

device, and then establish a

connection between the

Bluetooth

device and the unit again (p.69).

No sound is produced, or the sound is
interrupted during playback.

The volume of the

Bluetooth

device is set too low.

Turn up the volume of the

Bluetooth

device.

The

Bluetooth

device is not set to send audio signals to the unit.

Switch the audio output of the

Bluetooth

device to the unit.

The

Bluetooth

connection has been terminated.

Establish a

Bluetooth

connection between the

Bluetooth

device and the unit again

(p.69).

The unit and the

Bluetooth

device are too far apart.

Move the

Bluetooth

device closer to the unit.

There is a device (such as microwave oven and wireless LAN) that
outputs signals in the 2.4 GHz frequency band nearby.

Move the unit away from those devices.

Summary of Contents for Aventage RX-A1050



































































































































































Search results

Summary of Contents for Aventage RX-A1050

Reviews:

Related manuals for Aventage RX-A1050

Brands by name

Popular brands

Yamaha Aventage RX-A1050, Owner'S Manual

Search results

Summary of Contents for Aventage RX-A1050

Reviews:

Related manuals for Aventage RX-A1050

Brands by name

Popular brands