En
115
Selects whether or not a subwoofer is connected and its phase.
Settings
• When the bass sound is lacking or unclear, switch the subwoofer phase.
Selects the layouts of the surround speakers and front presence speakers.
Surround
Selects a surround speaker layout when surround speakers are used.
Settings
• This setting is not available when “Configuration (Surround)” is set to “None”.
Front Presence
Selects a front presence layout when front presence speakers are used. This
setting facilitates the optimization of the sound field effect.
Settings
• This setting is not available when “Configuration (Front Presence)” is set to “None”.
• To play Dolby Atmos contents using the front presence speakers, see “Presence speaker layout”
■
Distance
Sets the distance between each speaker and listening position so that sounds from the
speakers reach the listening position at the same time. First, select the unit of distance
from “Meter” or “Feet”.
Choices
Front L, Front R, Center, Surround L, Surround R, Surround Back L, Surround Back R,
Front Presence L, Front Presence R, Subwoofer
Setting range
0.30 m to 3.00 m to 24.00 m (1.0 ft to 10.0 ft to 80.0 ft), *0.05 m (0.2 ft) increments
■
Level
Adjusts the volume of each speaker.
Choices
Front L, Front R, Center, Surround L, Surround R, Surround Back L, Surround Back R,
Front Presence L, Front Presence R, Subwoofer
Setting range
-10.0 dB to 0.0 dB to +10.0 dB (0.5 dB increments)
Subwoofer
Use
Normal
Select this option when a subwoofer is connected (phase not
reversed). The subwoofer will produce LFE (low-frequency effect)
channel audio and low-frequency components from other channels.
Reverse
Select this option when a subwoofer is connected (phase reversed).
The subwoofer will produce LFE (low-frequency effect) channel audio
and low-frequency components from other channels.
None
Select this option when no subwoofer is connected. The front speakers
will produce LFE (low-frequency effect) channel audio and
low-frequency components from other channels.
Layout
Rear
Select this option when surround speakers are placed on the rear side
of the room.
Front
Select this option when surround speakers are placed on the front side
of the room. Virtual CINEMA FRONT (p.62) works in this case.
Front Height
Select this option when front presence speakers are installed on the
front side wall.
Overhead
Select this option when front presence speakers are installed to the
ceiling.
Dolby Enabled SP
Select this option when using the Dolby Enabled speakers as the front
presence speakers.
