PLAYBACK
➤
Configuring playback settings for different playback sources (Option menu)
En
99
■
Video Processing (Video Process.)
Enables/disables the video signal processing (resolution and aspect ratio) settings
configured in “Processing” (p.116) in the “Setup” menu.
Settings
■
Input Settings (Input Settings)
Configures the input settings.
• This setting is applied separately to each input source.
Corrects volume differences between input sources. If you are bothered by volume
differences when switching between input sources, use this function to correct it.
Setting range
-6.0 dB to 0.0 dB to +6.0 dB (0.5 dB increments)
Selects the audio input jack to use when more than one audio connection is made
for one input source.
Settings
Selects a video to be output with the audio input source.
Settings
Default
USB: V-AUX (V-AUX)
Others: Off (Off)
■
Audio Mode (Audio Mode)
(U.S.A. model only)
Switches between stereo and monaural for FM/AM radio reception.
• This setting is applied separately to each band (FM/AM).
Settings
• HD Radio programs are not available when the unit is in the monaural reception mode.
■
FM Mode (FM Mode)
(Except for U.S.A. model)
Switches between stereo and monaural for FM radio reception.
Settings
Direct (Direct)
Disables the video signal processing.
Processing
(Processing)
Enables the video signal processing.
Input Trim (In.Trim)
Audio Select (A.Sel)
Auto (Auto)
Automatically selects the audio input jack in the following priority order.
1. HDMI input
2. Digital input (COAXIAL or OPTICAL)
3. Analog input (AUDIO)
HDMI (HDMI)
Always selects HDMI input. No sounds are produced when no signals
are input through the HDMI jack.
Coax/Opt
(Coax/Opt)
Always selects digital input (COAXIAL or OPTICAL). No sounds are
produced when no signals are input through the COAXIAL or
OPTICAL jack.
Analog (Analog)
Always selects analog input (AUDIO). No sounds are produced when
no signals are input through the AUDIO jacks.
Video Out (V.Out)
Off (Off)
Does not output video.
AV 1–7 (AV1–7),
V-AUX (V-AUX)
Outputs video input through the corresponding video input jacks.
Auto (Auto)
Receives the selected band (FM or AM) in stereo sounds when the
signal reception is good and in monaural sounds when it is not good.
Mono (Mono)
Receives the selected band (FM or AM) in monaural sounds.
Stereo (Stereo)
Receives FM radio in stereo sounds.
Mono (Mono)
Receives FM radio in monaural sounds.
