Yamaha AVENTAGE RX-A1040 Owner'S Manual Download

Page: 26 / 160

PREPARATIONS

➤

Connecting a TV

Connect a TV to the unit so that video input to the unit can be output to the TV.

You can also enjoy playback of TV audio on the unit.

To maximize the performance of the unit, we recommend connecting a TV with an HDMI
cable.

■

HDMI connection

Connect the TV to the unit with an HDMI cable and an audio cable (digital optical or
stereo pin cable).

• You can connect another TV or a projector by using the HDMI OUT 2 jack (p.28).

• You do not make an audio cable connection between the TV and the unit in the following cases:

– If your TV supports Audio Return Channel (ARC)

– If you will receive TV broadcasts only from the set-top box

• If you connect a TV that supports HDMI Control to the unit with an HDMI cable, you can control the unit’s

power and volume with the TV’s remote control.

To use HDMI Control and ARC, you need to configure the HDMI settings on the unit. For
details on the settings, see “Information on HDMI” (p.147).

■

Component/composite video connection

When connecting any video device with a component video cable, connect the TV to
the MONITOR OUT (COMPONENT VIDEO) jacks.

When connecting any video device with a video pin cable, connect the TV to the
MONITOR OUT (VIDEO) jack.

• If you connect your TV to the unit with a cable other than HDMI, video input to the unit via HDMI cannot be

output to the TV.

• Operations with TV screen are available only when your TV is connected to the unit via HDMI.

• If you will receive TV broadcasts only from the set-top box, you do not need to make an audio cable

connection between the TV and the unit.

Connecting a TV

HDMI

OPTICAL

AUDIO 1

(2 TV)

AUDIO

OPTICAL

HDMI OUT

ARC

(ZONE OUT)

HDMI

The unit (rear)

HDMI OUT jack

AUDIO 1

(OPTICAL or AUDIO) jacks

Audio output

(digital optical or analog stereo)

HDMI input

About Audio Return Channel (ARC)

• ARC allows audio signals to travel both ways. If you connect a TV that supports ARC to the unit with a

single HDMI cable, you can output video/audio to the TV or input TV audio to the unit.

• When using ARC, connect a TV with an HDMI cable that supports ARC.

1 2 3 4 5 6 7 8 9 10

Summary of Contents for AVENTAGE RX-A1040

































































































































































Search results

Summary of Contents for AVENTAGE RX-A1040

Reviews:

Related manuals for AVENTAGE RX-A1040

Brands by name

Popular brands

Yamaha AVENTAGE RX-A1040, Owner'S Manual

Search results

Summary of Contents for AVENTAGE RX-A1040

Reviews:

Related manuals for AVENTAGE RX-A1040

Brands by name

Popular brands